SOBRE ESTE EPISÓDIO
This is a two-part course. Part 2 titled, “Molecular Electronics-II: Molecular Electronic Device Fabrication and Characterization” will: Discuss the advantages of molecular electronic devices and present experimental proof of concepts; Describe the formation of molecular junctions, the central component of molecular electronic devices; Describe the design and fabrication approaches for some of the most successful molecular electronic device prototypes; Present electrical characterization approaches and challenges; Discuss non-device based electrical screening approaches; Present the current status and outlook for molecular electronic devices.
Inglês
Estados Unidos da América
TRANSCRIÇÃO 🔗
Are you the producer of this podcast?
Add a podcast transcript
Need Audio-to-Text?
Transcribe with Listen411 in Just 60 Seconds
PESQUISAR EPISÓDIOS PASSADOS
Pesquisar episódios anteriores de Components Circuits and Drives.
OUTROS EPISÓDIOS NESTE PODCAST
This tutorial follows the read path from the word line to the input of the sense amp which includes the initial column decode that selects the appropriate bit line. Particular attention will be paid to the large capacitive load that the memory cells have on the bit lines, and waveforms from simulat…
A synchronous RAM is activated on the rising edge of clock and basically has 2 main internal cycles: the active cycle when the read or write is occurring and the pre-charge cycle that sets up the initial conditions for the next new clock cycle. The timing requirements and relationships that the cus…
The interaction in the array between the two ports can have some adverse effects that must be evaluated when designing a Dual Port SRAM, especially when one of the ports is doing a write. This tutorial takes a close look at a "Word Line collision" that occurs when one port is writing while the othe…
This dual port SRAM utilizes a 2-sided differential sensing scheme by taking advantage of the fact that both bit true and bit complement bit lines are available due to the nature of the 6T SRAM bit cell. The sense amp is clocked by a 1 of 4 decoded Sense Amp Clock utilizing a regenerative feedback …
The sub-blocks of the dual port memory architecture is presented in the tutorial with a key focus on the path from the array bit lines to the data pins for both the read and write. A memory can have many possibilities of how the bits and bits per word is configured which is based on the number of r…
Aviso: O podcast e a arte incorporada nesta página são de iTunes U Podcast Owner, que é propriedade de seu proprietário e não é afiliado ou endossado por Listen Notes, Inc.
EDITAR
Obrigado por ajudar a manter a base de dados dos podcasts atualizada.
