TENTANG EPISODE INI
Grate furnace, wood fuel smelting experiment Subscribe: http://bit.ly/subPT | Never miss a video! Enable ‘ALL’ Notifications! Watch my newest content: https://youtube.com/playlist?list=PLGnWLXjIDnpBR4xqf3FO-xFFwE-ucq4Fj&playnext=1&index=2 Follow Primitive Technology: Wordpress: https://primitivetechnology.wordpress.com/ Patreon: https://patreon.com/user?u=2945881 Watch More Primitive Technology: Newest Uploads: https://youtube.com/playlist?list=PLGnWLXjIDnpBR4xqf3FO-xFFwE-ucq4Fj&playnext=1&index=2 Pyrotechnology: https://youtube.com/playlist?list=PLGnWLXjIDnpBVRqu5lz5JGaQxjPs7q3CJ&playnext=1&index=2 Shelter: https://youtube.com/playlist?list=PLGnWLXjIDnpBBsdKZb-vy30o88SIxItp2&playnext=1&index=2 Weapons: https://youtube.com/playlist?list=PLGnWLXjIDnpA-XGDrrmVgBnSXx15i2Awp&playnext=1&index=2 Popular Videos: https://youtube.com/playlist?list=PLGnWLXjIDnpAb29Lrdki5BPjTpMon8zla&playnext=1&index=2 About This Video: I built a furnace from bricks with a grate to admit air that ran by natural draft and used wood fuel instead of charcoal to smelt a cylinder of iron ore and charcoal powder placed on the grate. The grate had a hexagonal cross-section and the furnace was made from bricks. The furnace was 1.5 cm tall when finished and about 50 cm wide internally. The ore brick was placed on a small pot filled with twigs in the centre of the grate so that it would melt into the pot. A crucible was not used because there is no clay refractory enough to withstand the heat here. The furnace was filled with wood. A fire was lit from the bottom up and the whole thing burned for about 2 hours. The ore brick had indeed melted but fell over during the smelt so the slag and iron didn\'t flow properly. The pot it was meant to melt into melted apart and cause the ore brick to topple. But the ore brick still did melt and some iron prills were visible but were to small to bother collecting. The ash from the firing was made into ash pellets for mortar production that will be used on another project I\'m working on. The furnace has potential, no labour is used during operation (no bellows or blower), no charcoal is needed though the wood must be cut to small pieces and a high temperature can be attained so that ore is melted. About Primitive Technology: Primitive technology is a hobby where you build things in the wild completely from scratch using no modern tools or materials. These are the strict rules: If you want a fire, use a fire stick - An axe, pick up a stone and shape it - A hut, build one from trees, mud, rocks etc. The challenge is seeing how far you can go without utilizing modern technology. I do not live in the wild, but enjoy building shelter, tools, and more, only utilizing natural materials. To find specific videos, visit my playlist tab for building videos focused on pyrotechnology, shelter, weapons, food & agriculture, tools & machines, and weaving & fiber. #PrimitiveTechnology #wood #fire
Inggris
Amerika Serikat
TRANSKRIP 🔗
Are you the producer of this podcast?
Add a podcast transcript
Need Audio-to-Text?
Transcribe with Listen411 in Just 60 Seconds
CARI EPISODE TERDAHULU
Cari episode sebelumnya dari Primitive Technology.
EPISODE LAIN DALAM PODCAST INI
I made iron using the old blower variant but using a larger diameter fan (30 cm rather than 25 cm). I did a longer smelt and a shorter smelt. The long smelt made 10 g of iron but the short smelt made 14 g sugesting that multiple shorter duration smelts may be more effective at producing iron rather…
Mud mortar experiment and firing roof tiles. Subscribe: http://bit.ly/subPT | Never miss a video! Enable ‘ALL’ Notifications! Watch my newest content: https://youtube.com/playlist?list=PLGnWLXjIDnpBR4xqf3FO-xFFwE-ucq4Fj&playnext=1&index=2 Follow Primitive Technology: Wordpress: https://pri…
I built a permanent wall structure using homemade fired bricks and a refined mud mortar mix. Watch the entire ancient engineering process from raw earth to finished masonry. The finished mortar gives the wall a clean, sturdy bond. #PrimitiveTechnology #building #mortar #firedbricks #engineering …
I fired 2 batches of barrel roof tiles to form the roof of the hut built in the previous episode. Then I cut the purlins for the roof and plastered them onto the gable end walls. The tiles were then put in place to start forming the roof. So far the walls are suporting the weight of the roof and ti…
I tested a variant of roof tie where it is a flat trapesoid with curved up sides to test if I could fit more of them into a kiln and have them cover more roof area than the curved barrel tiles. It turns out that the reason curved roof tiles are so comon is because the shape gives a long tile more…
Sanggahan: Podcast dan karya seni yang disematkan pada halaman ini berasal dari zas, yang merupakan milik pemiliknya dan tidak berafiliasi atau didukung oleh Listen Notes, Inc.
Sunting
Terima kasih telah membantu agar basis data podcast tetap terbaru