OM DENNE EPISODE
Zomotor Linear Actuator Teardown: Inside the Stator, Rotor & IPRS
What’s actually inside a linear actuator built for humanoid robots? In this teardown, we will take one apart piece by piece and explains how each part works. It’s all packed into a body just 32 mm in diameter.
You’ll see:
Stator: the fixed copper windings that create the magnetic field
Rotor: spins inside the stator and drives the screw
IPRS (Inverted Planetary Roller Screw): turns rotation into strong, precise linear motion
Actuators like this decide how strong, fast and precise a humanoid can move.
Building robots and looking for hardware or manufacturing partners? Message me or Jianhao at jianhao@hardinrobotics.com
What’s actually inside a linear actuator built for humanoid robots? In this teardown, we will take one apart piece by piece and explains how each part works. It’s all packed into a body just 32 mm in diameter.
You’ll see:
Stator: the fixed copper windings that create the magnetic field
Rotor: spins inside the stator and drives the screw
IPRS (Inverted Planetary Roller Screw): turns rotation into strong, precise linear motion
Actuators like this decide how strong, fast and precise a humanoid can move.
Building robots and looking for hardware or manufacturing partners? Message me or Jianhao at jianhao@hardinrobotics.com
Engelsk
USA
UDSKRIFT 🔗
Are you the producer of this podcast?
Add a podcast transcript
Need Audio-to-Text?
Transcribe with Listen411 in Just 60 Seconds
SØG BLANDT TIDLIGERE EPISODER
Søg efter gamle afsnit af Soft Robotics Podcast.
ANDRE EPISODE I DENNE PODCAST
I speak with James Kuffner, CTO of Symbotic, about warehouse robotics, humanoids, AI, and what it takes to move robots from impressive demos to real-world deployment.
A conversation about the future of robotics and the challenges of building systems that work at scale.
Humanoid robotics is increasingly bounded by battery life, which directly impacts uptime, operating costs, and ultimately unit economics.
Heat is another challenge. Thermal management can add weight and complexity, making battery design even more important. I sat down with Joe Papp, co-founder of …
The Case for Three Fingers ... Fluidic Tendons vs. Conventional Tendons vs. Direct Drive
Scott Walter and I sit down with Vikram Pavate, CEO of Tacta Systems, to dive into their unique approach to designing robotic hands.... including their work on multiple inventions in robotic hand design, their…
Matic Robots, Tomorrow’s Reveal + The New Hand of Foundation
Scott Walter and I sat down to talk about the new Hand of Foundation, as well as what’s coming with Matic robots and tomorrow’s reveal.
Why Did This Robot Take 7 Years? Matic Robots by Marwa ElDiwiny
Ansvarsfraskrivelse: Podcasten og kunstværket, der er indlejret på denne side, er fra Marwa ElDiwiny, som tilhører dens ejer og ikke er tilknyttet eller godkendt af Listen Notes, Inc.
REDIG
Tak fordi du hjælper med at holde podcast-databasen opdateret.
