OM DENNE EPISODE

Engelsk
USA

UDSKRIFT 🔗

SØG BLANDT TIDLIGERE EPISODER

Søg efter gamle afsnit af Primitive Technology.

ANDRE EPISODE I DENNE PODCAST

I fired 2 batches of barrel roof tiles to form the roof of the hut built in the previous episode. Then I cut the purlins for the roof and plastered them onto the gable end walls. The tiles were then put in place to start forming the roof. So far the walls are suporting the weight of the roof and ti…
Mud mortar experiment and firing roof tiles. Subscribe: http://bit.ly/subPT | Never miss a video! Enable ‘ALL’ Notifications! Watch my newest content: https://youtube.com/playlist?list=PLGnWLXjIDnpBR4xqf3FO-xFFwE-ucq4Fj&playnext=1&index=2 Follow Primitive Technology: Wordpress: https://pri…
I tested a variant of roof tie where it is a flat trapesoid with curved up sides to test if I could fit more of them into a kiln and have them cover more roof area than the curved barrel tiles. It turns out that the reason curved roof tiles are so comon is because the shape gives a long tile more…
I made iron using the old blower variant but using a larger diameter fan (30 cm rather than 25 cm). I did a longer smelt and a shorter smelt. The long smelt made 10 g of iron but the short smelt made 14 g sugesting that multiple shorter duration smelts may be more effective at producing iron rather…
Ansvarsfraskrivelse: Podcasten og kunstværket, der er indlejret på denne side, er fra zas, som tilhører dens ejer og ikke er tilknyttet eller godkendt af Listen Notes, Inc.