สำเนาบทสนทนา 🔗
WEBVTT
00:00:00.239 --> 00:00:04.879
Do you ever just walk into your shop thinking, I'm just gonna knock out a quick little project today?
00:00:04.959 --> 00:00:07.280
You've got the whole thing figured out in your head.
00:00:07.360 --> 00:00:12.880
You've got the lumber, you've got the tools, you know exactly what you're gonna do, and you think you're gonna be finished by lunchtime.
00:00:13.039 --> 00:00:21.920
And then about six hours later, you're in the middle of the shop covered in sawdust, staring at a piece of wood that's two inches too short, wondering where the hell everything went wrong.
00:00:22.160 --> 00:00:24.640
Because here's something I've learned about woodworking.
00:00:24.800 --> 00:00:28.239
No project ever seems to go exactly according to plan.
00:00:28.399 --> 00:00:29.519
Something always happens.
00:00:29.600 --> 00:00:40.240
You measure something wrong, you cut a board backward, your glue up turns into a complete disaster, or you spend three days building something beautiful, only to screw it up when you apply the finish.
00:00:40.320 --> 00:00:46.079
And the funny thing is when you watch woodworking videos on YouTube, everything just looks so easy on there.
00:00:46.240 --> 00:00:51.679
Every cut is perfect, every joint fits the first time, the finish goes on beautifully, the list goes on.
00:00:51.759 --> 00:01:00.079
But those of us who actually spend time in the shop know that there's usually a whole lot of frustration that happens between that first cut and the finished project.
00:01:00.320 --> 00:01:09.519
So today on the scrap pile, I'm going to be talking about the woodworking mistakes, the disasters, the unexpected problems that seem to happen no matter how long you've been doing this.
00:01:09.760 --> 00:01:17.920
And hopefully by the end of this episode, you'll feel a little better about that project sitting in the corner of your shop that you haven't even touched in three weeks.
00:01:25.760 --> 00:01:26.400
All right.
00:01:44.239 --> 00:01:49.359
But somehow every time we start a project, we convince ourselves that this one's going to be different.
00:01:49.680 --> 00:01:51.920
This one will be just a little bit different.
00:01:52.079 --> 00:01:54.079
Oh, it's just a little box.
00:01:54.239 --> 00:01:56.000
It's just a couple of shelves.
00:01:56.159 --> 00:02:00.000
I just need to cut a few boards and then screw them all together, right?
00:02:00.159 --> 00:02:01.280
Famous last words.
00:02:01.439 --> 00:02:02.159
We've all said that.
00:02:02.239 --> 00:02:05.439
I'm guilty of that almost on every single project that I do.
00:02:05.599 --> 00:02:13.840
Uh, because what we forget is that woodworking is not just cutting wood and then gluing it or fastening it or attaching it all back together.
00:02:14.080 --> 00:02:16.400
You've got to get the tools set up correctly.
00:02:16.560 --> 00:02:23.199
You have to have the tools, first of all, and then you have to get them set up correctly, and then you have to find the right lumber for the job.
00:02:23.439 --> 00:02:26.479
And it's not the finding the right lumber is a whole separate tangent.
00:02:26.560 --> 00:02:31.520
I could go down, but it's finding the right lumber is more than just what is gonna look the best.
00:02:31.680 --> 00:02:33.360
It has to practically be the best.
00:02:33.439 --> 00:02:34.960
But yeah, you have to find the right lumber.
00:02:35.039 --> 00:02:40.800
You have to make sure that um everything's square, you've got to sandy, you've got to apply finish to the project.
00:02:41.039 --> 00:02:48.400
And that's all just assuming that nothing goes wrong, which of course something always does, at least in my experience.
00:02:48.560 --> 00:02:54.800
But um, you also tend to underestimate the setup time and the cleanup time.
00:02:54.879 --> 00:02:58.400
You think to yourselves, well, okay, I'm building this bench.
00:02:58.560 --> 00:03:00.960
I need to cut the slats for the bench itself.
00:03:01.120 --> 00:03:06.000
I need to um, you know, cut the pieces for the back, I need to cut the legs.
00:03:06.080 --> 00:03:10.080
So I'm looking at maybe 10 or 15 cuts on the miter saw, a couple on the table saw.
00:03:10.159 --> 00:03:11.199
I attach it together.
00:03:11.280 --> 00:03:13.280
I can knock this out in the afternoon.
00:03:13.520 --> 00:03:21.360
What you don't plan on is that the board or the stock or the material that you're starting with is not milled properly to begin with, probably.
00:03:21.520 --> 00:03:22.800
You have to adjust that.
00:03:22.960 --> 00:03:25.680
You have to make your adjustments on your table saw.
00:03:25.759 --> 00:03:27.199
You have to clear off your table saw.
00:03:27.280 --> 00:03:32.159
The flat surfaces theory kicks in where you have junk that's sitting on your table saw all the time.
00:03:32.240 --> 00:03:34.800
So you have to clean it off to where you just have space to work.
00:03:34.960 --> 00:03:36.240
You don't account for all that.
00:03:36.400 --> 00:03:46.159
You don't account for the the half can the half full, half-empty can of finish that you have laying around your shop for six years that you think, well, there's still a little bit left.
00:03:46.240 --> 00:03:48.240
I'll use that for finish on my project.
00:03:48.479 --> 00:03:52.800
You open the can up and only an ounce of that finish is actually usable.
00:03:52.879 --> 00:03:54.960
So you run out of finish halfway through your project.
00:03:55.120 --> 00:03:59.759
So you have to go back to the store in the middle of your finishing process to get more finish.
00:03:59.919 --> 00:04:04.560
It's just you think the assembly will go faster than it actually does, always.
00:04:04.719 --> 00:04:08.639
The assembly process is kind of that moment in a project of relief.
00:04:08.719 --> 00:04:14.639
You think, okay, I've spent all this time milling the wood, um, getting it prepped, getting it ready.
00:04:14.719 --> 00:04:18.639
The finish, you know, the assembly is
Load full transcript
what will go quick.
00:04:18.720 --> 00:04:19.920
Now I've done the hard part.
00:04:20.000 --> 00:04:22.319
Now the easy part's just putting it all together.
00:04:22.560 --> 00:04:26.560
Yeah, that's not as simple as, quote, just putting it all together.
00:04:26.800 --> 00:04:28.959
That never goes that quick.
00:04:29.120 --> 00:04:38.399
And then you get anxiety because your glue, your wood glue has an open time, essentially from the time you open the bottle and it comes squirts out of the bottle to the time that it starts getting hard.
00:04:38.480 --> 00:04:40.079
It starts hardening it up and drying.
00:04:40.240 --> 00:04:41.920
So that anxiety sets in.
00:04:42.160 --> 00:04:48.720
And then you completely disregard or even forget about the sanding and the finishing of that project.
00:04:48.879 --> 00:04:51.519
And sanding, I could talk about for days.
00:04:51.600 --> 00:04:53.759
Uh, that is everyone's worst nightmare.
00:04:53.839 --> 00:05:04.000
And that is where most people do not spend enough time because you have the excitement and the pride of the project being assembled and quote, done.
00:05:04.240 --> 00:05:08.079
You know, you're like, oh, miss this thing's done, all I need to do is put finish on it.
00:05:08.399 --> 00:05:13.759
And I mean, I've had projects where you can literally spend 12 hours just sanding the project.
00:05:14.399 --> 00:05:20.480
And that sounds ridiculous, but that if you do not sand enough, another woodworker will be able to tell.
00:05:20.560 --> 00:05:28.639
Now, the average customer may not tell, um, but sanding is usually underestimated big time.
00:05:28.879 --> 00:05:35.600
Um again, I mentioned unexpected trips for materials and and things that you need after you're already started on a project.
00:05:35.839 --> 00:05:45.680
And by the way, when you take that trip to go get more stuff that you forgot you needed, you just completely lost all motivation, all you know, forward momentum you had with that project.
00:05:45.920 --> 00:05:53.439
Um and and and that, you know, all this is the difference between project time and actual shop time.
00:05:54.000 --> 00:05:58.560
Uh you you you yeah, you think you're gonna get it done in the afternoon.
00:05:58.800 --> 00:05:59.920
Ha ha ha.
00:06:00.160 --> 00:06:00.959
Yeah, right.
00:06:01.199 --> 00:06:05.439
Um, I think the funniest part for me is that I never seem to learn.
00:06:05.519 --> 00:06:08.560
I I never seem to I keep doing the same thing over and over again.
00:06:08.639 --> 00:06:09.199
I don't learn.
00:06:09.279 --> 00:06:14.160
I keep saying, well, I'll finish that project uh that took three times longer than expected.
00:06:14.480 --> 00:06:19.360
And then the very next weekend I walk into the shop and say, I'm just gonna knock this one out real quick.
00:06:19.839 --> 00:06:20.480
Yeah, no.
00:06:20.720 --> 00:06:24.560
It's like woodworking gives us some kind of selective amnesia, right?
00:06:24.639 --> 00:06:25.839
And at least in my experience.
00:06:26.000 --> 00:06:33.759
The fastest way to turn a two-hour project into an all-day project is to tell yourself that it'll only take two hours.
00:06:34.000 --> 00:06:34.879
Good luck to you.
00:06:35.040 --> 00:06:36.560
All right, next thing.
00:06:36.800 --> 00:06:37.759
Um, measuring.
00:06:37.920 --> 00:06:46.959
I want to talk about that for a second because there's few things in this world that are more frustrating in woodworking than cutting a board too short.
00:06:47.199 --> 00:06:49.279
If you're gonna make a mistake, cut it too long.
00:06:49.519 --> 00:06:50.639
Easier said than done.
00:06:50.800 --> 00:06:52.720
You can just say, I'm only gonna cut it too long.
00:06:52.800 --> 00:06:56.480
No, we all make mistakes, but if it's too long, it's generally not a problem.
00:06:56.639 --> 00:06:58.000
You just cut more off of it.
00:06:58.079 --> 00:07:01.519
Uh, but if it's too short, you can't add that wood back.
00:07:01.680 --> 00:07:06.160
So, congratulations, you've just made a really expensive piece of scrap wood.
00:07:06.240 --> 00:07:14.240
Um, and it seems to always happen, of course, at the most inopportune, worst possible time in the project.
00:07:14.399 --> 00:07:21.439
You've got six pieces that are cut perfectly, you're feeling good, you're on a roll, everything's going according to plan.
00:07:21.600 --> 00:07:24.560
And then you cut the seventh piece.
00:07:24.879 --> 00:07:28.399
Hold it up after you cut it, and then you realize you're about an inch short.
00:07:28.480 --> 00:07:36.800
And now you're standing there trying to figure out whether you can somehow make the entire project an inch smaller or what you can do to try to salvage that or whatever.
00:07:36.959 --> 00:07:37.439
I don't know.
00:07:37.600 --> 00:07:44.399
Um, I don't know why this happens, especially sometimes it happens with people because they just simply don't know how to read a tape measure.
00:07:44.480 --> 00:07:46.000
And I don't mean that in a condescending way.
00:07:46.079 --> 00:07:48.480
Some people just don't know how to read a tape measure, it's fine.
00:07:48.639 --> 00:07:56.000
Um, or some people know how to read a tape measure perfectly, uh, but maybe you read the opposite side.
00:07:56.319 --> 00:07:57.680
I am guilty of this.
00:07:57.759 --> 00:08:08.800
A tape measure reads one way, and what I mean is if you hold the tape measure in your left hand out in front of you and you pull the tape with your right hand, it is oriented correctly to you.
00:08:09.040 --> 00:08:10.240
Most tape measures.
00:08:10.560 --> 00:08:13.920
Some brands have it on both sides, but most of them that is the case.
00:08:14.079 --> 00:08:22.000
If you hold the tape measure with your right hand, pull the tape with your left hand, and you're reading the numbers, a lot of times that is upside down.
00:08:22.800 --> 00:08:25.120
Um, or maybe I just said that whole thing's opposite.
00:08:25.199 --> 00:08:27.439
I'd have to look at
a tape measure, but you know what I'm saying.
00:08:27.600 --> 00:08:31.519
One way the numbers are right side up, the other way they're upside down.
00:08:31.759 --> 00:08:35.759
And uh in my case, I know how to read a tape measure perfectly fine, right?
00:08:36.000 --> 00:08:49.840
But um, if it's upside down, I will read as an example three eighths instead of five eighths, or I will read five eighths instead of three-eighths because I'm looking at the wrong side of the line because I'm upside down, if that makes any sense.
00:08:50.080 --> 00:09:00.720
Um, and the other thing that gets me with measuring is that sometimes I will forget to account for the curve thickness of the blade.
00:09:00.960 --> 00:09:07.840
So if you are cutting to a line and your blade is on the outside of the line, no problem.
00:09:08.159 --> 00:09:12.720
But if you're cutting to the inside of the line, you need to account for the thickness of the blade.
00:09:12.799 --> 00:09:14.159
That is called the curve.
00:09:14.399 --> 00:09:17.759
On my table saw, it is one eighth of an inch.
00:09:18.240 --> 00:09:29.279
Um, if I don't account for that, well now my piece is going to be one eighth of an inch too short or one eighth of an inch too long, depending on you know which way I'm the orientation of the setup of the cut.
00:09:29.519 --> 00:09:34.159
Um and I guess going along with that, I mentioned on the side of a line.
00:09:34.240 --> 00:09:43.360
Uh, if you sometimes I just blatantly cut on the wrong side of a line, you know, and some people will mark a line and put an X on the side that they know where they're going to cut to.
00:09:43.519 --> 00:09:44.799
I don't always do that.
00:09:44.960 --> 00:09:51.919
Um, and if you don't, I'm I'm very guilty of just simply cutting to the wrong side of a line and mess.
00:09:52.240 --> 00:09:54.480
You know, now you got a bad measurement.
00:09:54.720 --> 00:10:04.240
Um, the other thing that has happened to me several times, and it happens to a lot of people if you're doing multiple parts in a project that all need to be the same dimension.
00:10:04.399 --> 00:10:11.039
Let's say you're making that bench I was talking about, and you need that the part you're gonna sit on, the slats of the bench, so to speak.
00:10:11.200 --> 00:10:14.320
Let's say you need 10 of them, five for the bottom and five for the top.
00:10:14.480 --> 00:10:18.000
You will cut all 10 before you check your measurement on the first one.
00:10:18.320 --> 00:10:19.519
I am guilty of this.
00:10:19.679 --> 00:10:26.720
I set up my stop block and I cut 10 of them because my stop block's always correct, at least in my mind, right?
00:10:26.879 --> 00:10:28.799
Um, and so I cut all 10.
00:10:28.879 --> 00:10:30.639
Well, now all 10 are short.
00:10:31.039 --> 00:10:36.399
Instead of cut one, measure it, make sure it's correct, and then cut the remaining nine.
00:10:36.480 --> 00:10:39.600
Um, but that that happens to me a lot.
00:10:39.679 --> 00:10:47.360
And then what you end up trying to do is trying to salvage or save a piece that's already too short and it it spirals.
00:10:47.519 --> 00:10:52.080
Now you're you're pissed off, you're you know, you're uh frustrated with the project.
00:10:52.240 --> 00:10:56.240
That leads into poor skill set on future steps in the project.
00:10:56.480 --> 00:10:58.639
It's just uh, yeah, I don't know.
00:10:58.720 --> 00:11:05.360
Something I've learned is that like the longer you've been woodworking, the more dangerous it can be to get too comfortable.
00:11:05.519 --> 00:11:08.320
Um, because when you're new, you check everything.
00:11:08.480 --> 00:11:11.919
You're second guessing yourself, you're nervous about making it absolutely perfect.
00:11:12.000 --> 00:11:13.679
You pay more attention, to be honest.
00:11:13.840 --> 00:11:20.159
You measure three times on one thing, you double check your marks, you make test cuts, you sneak up on the cut.
00:11:20.320 --> 00:11:28.000
But once you've been doing it for a while, you sometimes get a little bit too confident, you get complacent a little bit, and that's when you typically make the dumbest mistakes.
00:11:28.320 --> 00:11:32.720
As with anything, not just woodworking, but anything you're comfortable with, you're a little bit more laxed.
00:11:32.799 --> 00:11:36.159
I mean, again, you're comfortable that you're gonna be a little bit more laxed.
00:11:36.240 --> 00:11:46.960
Um, with woodworking, experience does not necessarily mean that you stop making mistakes, it just means that you get better at making them faster and recovering from them, right?
00:11:47.120 --> 00:11:50.799
But um, all right, so that's with the cutting material.
00:11:50.879 --> 00:11:58.720
Let me talk about glue ups for a second, because I think glue ups are where woodworking projects go to die because it is the pause.
00:11:58.799 --> 00:12:01.440
You can spend hours getting everything cut perfectly.
00:12:01.519 --> 00:12:06.480
You dry fit the project, everything lines up, the joints are fitting like they should.
00:12:06.559 --> 00:12:07.679
You're feeling pretty good about it.
00:12:07.759 --> 00:12:15.279
You grab the glue bottle, and suddenly it's like you're trying to assemble a piece of furniture in a tornado.
00:12:15.440 --> 00:12:24.559
The pieces start sliding around on you, they don't hold in place, they don't hold perfectly square, the clamps aren't are not left where or holding where you thought they were.
00:12:24.720 --> 00:12:29.840
You realize that you forgot to put glue on a different joint, so now you're having to take the whole thing apart.
00:12:29.919 --> 00:12:31.519
Um, and then vice versa.
00:12:31.679 --> 00:12:43.200
You realize you put glue on somewhere you were not supposed to, and this entire time you've got this imaginary kind of clock that I talked about a minute ago that's ticking in your head because you know that glue isn't going to stay workable forever.
00:12:43.279 -->
00:12:45.360
It's going to dry, it's going to start hardening up.
00:12:45.600 --> 00:12:52.559
That's one side of the going-to-die comment I made is that the the anxiety of doing the glue up.
00:12:52.720 --> 00:12:58.320
The other side of this is that glue ups have the pause, the the wait a minute, the stop.
00:12:58.480 --> 00:13:09.200
And what I mean is when you glue something up, you it goes into clamps, you set it aside while you work on something else because you have to give that project time to dry before you can do the next step in the process.
00:13:09.440 --> 00:13:12.559
And while it's drying, you go again, you go do something else.
00:13:12.639 --> 00:13:17.679
You clean your shop, you start another project, maybe you go inside, you eat lunch, you mow the grass, whatever it is.
00:13:17.919 --> 00:13:19.759
And then life happens.
00:13:20.320 --> 00:13:23.360
And so you don't get back to that glue up for two weeks.
00:13:23.519 --> 00:13:28.240
That's why I made the comment about where would projects go to die in the glue ups.
00:13:28.320 --> 00:13:33.039
Because when you're working on a project, at least for me, I have tons of motivation.
00:13:33.120 --> 00:13:33.759
I'm driven.
00:13:33.840 --> 00:13:35.679
I'm I'm like, hey man, this is exciting.
00:13:35.759 --> 00:13:38.480
I'm rocking and rolling, my everything, yeah, rock on.
00:13:38.559 --> 00:13:43.200
You know, we're we're like measurements are coming out perfectly, joints are fitting.
00:13:43.360 --> 00:13:44.879
Next step, what's the next thing?
00:13:45.039 --> 00:13:46.000
How much can I get done?
00:13:46.080 --> 00:13:47.279
How productive can I be?
00:13:47.440 --> 00:13:50.960
And then it's like, all right, got that glue up done.
00:13:51.279 --> 00:13:54.320
Let me go catch up, help my wife with the laundry.
00:13:54.480 --> 00:13:55.519
Let me go cook supper.
00:13:55.600 --> 00:13:56.720
Let me go do this.
00:13:56.960 --> 00:13:58.879
And then, well, I'm tired for the day.
00:13:58.960 --> 00:14:00.399
Let me watch TV the rest of the night.
00:14:00.480 --> 00:14:02.720
And then, oh, by the way, I go back to work tomorrow.
00:14:02.879 --> 00:14:05.279
And then, you know, it's like life just starts happening.
00:14:05.360 --> 00:14:10.240
So that glue up that really only needed about two and a half, three hours to dry before you could take it out of the clamps.
00:14:10.480 --> 00:14:12.720
It takes two and a half to three weeks to dry.
00:14:12.799 --> 00:14:14.159
And you just lost your motivation.
00:14:14.320 --> 00:14:16.879
That's what I mean when I say that project goes there to die.
00:14:17.039 --> 00:14:20.159
Um, by the way, I mentioned dry fit versus a real glue up.
00:14:20.240 --> 00:14:24.720
And I had a comment on one of my videos several years ago about uh what is a dry fit.
00:14:24.879 --> 00:14:29.600
A dry fit is essentially you are, quote, gluing up the project without the glue.
00:14:29.840 --> 00:14:33.919
So you're you're you're putting all your joints together, you're fitting everything together.
00:14:34.000 --> 00:14:35.840
You might even go ahead and put clamps on.
00:14:36.000 --> 00:14:41.200
And this is just to see that it's going to work once you put the glue on it.
00:14:41.279 --> 00:14:47.200
It's a stress-free way of doing a glue up before you do the glue up, if if that makes sense.
00:14:47.360 --> 00:14:57.679
Um, another anxiety-inducing thing during the glue up process is going to be you don't have enough clamps, or you have enough clamps, but you don't have them ready and handy and available and ready to go.
00:14:57.840 --> 00:15:09.679
If you're having to hold this happens to me all the time, you're balancing a project on your workbench with one hand and your glue bottle is in the other hand, and then uh-oh, your clamp is on another workbench on the other side of the shop.
00:15:09.759 --> 00:15:11.919
You forgot to have everything within arm's reach.
00:15:12.080 --> 00:15:15.440
Well, you can't carry the project over there with one hand because it's too big.
00:15:15.519 --> 00:15:17.519
You're stuck holding this with your left hand.
00:15:17.600 --> 00:15:22.639
You can't reach the clamp, so now you have to undo everything with your left hand, otherwise it's just gonna fall down, right?
00:15:22.960 --> 00:15:23.679
Anxiety.
00:15:23.840 --> 00:15:25.919
It can be anxiety-inducing.
00:15:26.080 --> 00:15:31.279
Um, or or you know, maybe both hands are tied up holding this project and you don't have the clamps available.
00:15:31.360 --> 00:15:36.559
You're trying to assemble too many pieces of the project at once with just your two hands.
00:15:37.120 --> 00:15:43.279
Parts start to slip out of alignment, they start to go out of square, joints start to back out instead of being super tight.
00:15:43.440 --> 00:15:48.960
Maybe you put too much glue on that joint and you just have glue squeezing out messy all over the place.
00:15:49.120 --> 00:15:55.360
Um, maybe you forgot to put like uh clamping calls or protective blocks on your clamp.
00:15:55.600 --> 00:16:00.720
So now you're wrenching down on this clamp, getting it as tight as possible to hold the woodworking piece in place.
00:16:01.120 --> 00:16:07.919
And now you're gonna have marred up the surface of your project because you forgot to have a sacrificial block there to take the weight of that clamp.
00:16:08.080 --> 00:16:08.480
I don't know.
00:16:08.559 --> 00:16:16.000
And and look, I swear clamps have some sort of like supernatural ability to disappear exactly when you need them the most.
00:16:16.320 --> 00:16:22.879
I mean, again, it's like, I swear I brought these clamps over here to this workbench and now they're on the other side of the shop.
00:16:22.960 --> 00:16:33.039
And you do have 40 clamps hanging on the wall, of course, but the second you start to do a glue up, none of them are the right size, or you don't have them pre-stretched out, you know, long enough to what you
need.
00:16:33.120 --> 00:16:38.879
So you're one hand trying to jiggle the back of the clamp backwards so you have enough room to fit it around your project and clamp it down.
00:16:38.960 --> 00:16:48.879
And somehow the one clamp that you actually need is holding together another project on the other side of the shop that was in the glue up you did two weeks ago, right?
00:16:49.039 --> 00:16:56.240
This is all scenario-based kind of what if hypothizing here in theory type stuff, but I, you know, this is stuff that happens.
00:16:56.320 --> 00:16:59.039
I'm making it comical, but it absolutely is stuff that happens.
00:16:59.120 --> 00:17:06.480
And look, I think that one of the best things you can do before complicated glue up is to slow down and actually think through the process.
00:17:06.640 --> 00:17:09.200
And I am the most guilty of that statement.
00:17:09.359 --> 00:17:10.480
Um, I'm in a hurry.
00:17:10.799 --> 00:17:11.279
Most people are.
00:17:11.359 --> 00:17:22.079
It's like, man, you're excited, you're like you're trying to go slow down, lay everything out, have the clamps ready, figure out the order of assembly, your order of operations, the process you're going to work through.
00:17:22.240 --> 00:17:28.640
Because once the glue comes out of that bottle and onto your workpiece, it's a whole different ballgame and the clock is ticking.
00:17:28.880 --> 00:17:34.079
And um, yeah, dry fitting is is smart, is wise.
00:17:34.400 --> 00:17:38.160
That's the level that is a sign of an experienced woodworker.
00:17:38.319 --> 00:17:44.799
Dry fit is woodworking, a glue up is like timed survival exercise, basically.
00:17:44.960 --> 00:17:48.960
Anyway, so here's one uh something else that kind of gets me sometimes.
00:17:49.039 --> 00:17:53.759
The mistake that you don't notice until it's too late.
00:17:54.079 --> 00:17:57.839
And these are the worst because sometimes everything seems to be going perfectly.
00:17:58.000 --> 00:18:12.640
You're making good progress, the project is looking good, you're you're you have that sense of pride, you're feeling proud of yourself, and then when you step back and you look at the project from a different angle and you realize that something, you can't put your finger on what it is, but something is completely wrong.
00:18:12.799 --> 00:18:14.079
It just doesn't look right.
00:18:14.240 --> 00:18:19.039
Maybe you installed a piece that was backwards or in upside down, you know, the wrong orientation.
00:18:19.200 --> 00:18:26.160
Maybe you drilled holes on the wrong side, maybe the grain is just running in the wrong direction than what you had pictured.
00:18:26.240 --> 00:18:26.720
I don't know.
00:18:26.880 --> 00:18:30.400
Maybe you've just glued together something that was supposed to come apart.
00:18:30.559 --> 00:18:33.519
You accidentally put glue right there and it wasn't supposed to be there.
00:18:33.599 --> 00:18:35.119
And now you have a decision to make.
00:18:35.200 --> 00:18:41.920
You're like, hey, am I gonna try to fix this, or do I basically scrap the whole project and start over?
00:18:42.000 --> 00:18:48.960
Or do you, or I guess there's a third option, you just stand there staring at it for 20 minutes, hoping that somehow it'll fix itself, right?
00:18:49.039 --> 00:18:50.400
That that does happen too.
00:18:50.640 --> 00:18:53.519
Um, did this again, all this stuff happens to me.
00:18:53.599 --> 00:18:55.759
I'm sharing my experiences here.
00:18:56.000 --> 00:18:58.240
Um, some of these are just design mistakes.
00:18:58.400 --> 00:19:02.160
Maybe there was a mistake, it was a legit mistake when you design the project.
00:19:02.319 --> 00:19:04.640
You just A didn't notice it during the design.
00:19:04.720 --> 00:19:10.160
You had to physically cut the parts and physically work with the wood before you could kind of realize the design.
00:19:10.559 --> 00:19:20.160
Or um, or it was just a design area that you just didn't catch, you a design error that you did not catch when you were doing the design.
00:19:20.400 --> 00:19:27.839
And I do think that all these mistakes are especially frustrating because they're usually just so obvious afterward.
00:19:27.920 --> 00:19:29.359
You you feel deflated.
00:19:29.440 --> 00:19:34.480
It's like, man, once you see that problem, you can't believe that you didn't notice it earlier.
00:19:34.559 --> 00:19:37.200
You're like hitting yourself on the head like a freaking idiot.
00:19:37.440 --> 00:19:43.200
But that is woodworking, that's part of kind of the skill and the the good, bad, and the ugly with woodworking.
00:19:43.279 --> 00:19:49.279
Sometimes you're so focused on the step you're working on at that time that you lose sight of the bigger picture.
00:19:49.359 --> 00:19:51.359
You can't see the forest for the trees, basically.
00:19:51.519 --> 00:20:04.640
Um, the most expensive woodworking mistakes are sometimes the ones that uh that you don't realize until you've made after you don't realize them that you've made those mistakes until after the glue is dry.
00:20:04.799 --> 00:20:06.720
And those hurt a little bit.
00:20:06.960 --> 00:20:13.920
Hey, real quick, if you're not already subscribed or liking this episode, if you're on audio only, can you please do that?
00:20:14.000 --> 00:20:15.359
Can you hit the thumbs up button?
00:20:15.519 --> 00:20:17.680
Subscribe to my channel if you're watching on YouTube.
00:20:17.839 --> 00:20:25.759
And again, if you're listening on Apple Podcasts, Spotify, whatever your platform is, can you leave this a five-star review as well as follow the show?
00:20:25.920 --> 00:20:27.920
I would greatly appreciate it.
00:20:30.000 --> 00:20:40.960
Now I want to talk about something that makes woodworking a little bit different from other hobbies, is that we are working with a material that does not always cooperate or doesn't always want to cooperate with us.
00:20:41.200 --> 00:20:47.359
Wood moves, whether you know it or
not, and you may be a beginner and not realize it yet, but wood absolutely moves.
00:20:47.519 --> 00:20:55.440
It it can twist, it can cup, it can warp, it can sometimes just do all three if it's trying to make our life miserable, right?
00:20:55.599 --> 00:20:56.799
We get so frustrated.
00:20:56.960 --> 00:21:08.559
You can take a beautiful flat board, you can mill it up perfectly, sit it down on your bench, come back later to find that it's decided to be a potato chip.
00:21:08.880 --> 00:21:10.400
This does happen.
00:21:10.640 --> 00:21:20.960
Generally, this is caused by moisture changes, either in the atmosphere, and what I don't mean like in outer space, but I mean like the atmosphere of your shop, the environment of your shop.
00:21:21.119 --> 00:21:27.519
If your shop is not climate controlled and it's hot during the daytime, then the sun goes down and it gets cold at night.
00:21:27.599 --> 00:21:30.559
That can affect the moisture content inside the wood.
00:21:30.720 --> 00:21:33.519
Um, yeah, the atmosphere or just the moisture changes.
00:21:33.599 --> 00:21:41.680
Again, if it's if you use green wood, wet wood, it still has moisture in it, hasn't been killed dried, and you let it dry out for two weeks in your hot shop.
00:21:41.759 --> 00:21:43.839
Well, now it's going to have less moisture content.
00:21:44.000 --> 00:21:50.480
That can cause some changes in this wood, especially if it doesn't dry evenly, if it's not controlled drying, all that stuff can happen.
00:21:50.559 --> 00:21:57.680
And that's what causes these uh wood characteristics the wood movement, the cupping, the twisting, the warping, all that good stuff.
00:21:57.920 --> 00:22:05.200
Boards um can even Move even if they are kiln dried, they can move after being milled up.
00:22:05.440 --> 00:22:12.079
Because even if it's kiln dried, if it's a two and a half inch rough cut piece of white oak, let's just say it could be any species.
00:22:12.160 --> 00:22:16.720
It's two and a half inch thick slab of something, and it is kiln dried.
00:22:16.880 --> 00:22:21.200
Went through the process the correct way, a little bit of air drying, then you know, kiln drying, everything.
00:22:21.279 --> 00:22:24.880
You checked it with a moisture meter, but then you mill it down to one inch.
00:22:25.119 --> 00:22:26.240
I don't know why you would do that.
00:22:26.400 --> 00:22:28.799
Why would you start with something so big and go down to one inch?
00:22:28.880 --> 00:22:38.720
But let's just say, well, then it yeah, it's going to be wetter inside on the inside, you know, on the middle piece of that slab than it is on the outside.
00:22:38.799 --> 00:22:47.119
So milling down wood at, you know, from before milling to after milling can absolutely cause the wood to move and have a change in the moisture content.
00:22:47.359 --> 00:22:53.839
You also have internal stresses that are released in the wood during cutting.
00:22:54.000 --> 00:23:01.920
And this happens to me a lot and will happen to a lot of other people if you use, especially I should say, when you're using construction lumber.
00:23:02.079 --> 00:23:09.680
If you use yellow pine from Lowe's or Home Depot and you're cutting it on the table saw, have you ever had the blade almost bind up?
00:23:09.759 --> 00:23:16.559
And then right when you get to the end, right when you're about to finish the cut, it pops and the wood basically breaks off.
00:23:16.720 --> 00:23:17.519
That is a stress.
00:23:17.680 --> 00:23:23.279
Those wood fibers are being stressed, meaning you're, you know, they're actually they're they're trying to bend.
00:23:23.359 --> 00:23:26.400
There's a natural force that are stressing those fibers.
00:23:26.720 --> 00:23:30.720
And when you make a cut, that relieves some of that stress.
00:23:30.960 --> 00:23:36.480
And that that by the way, relieving that stress is not necessarily a good thing.
00:23:36.559 --> 00:23:38.480
Um, I'm just saying that's what happens.
00:23:38.640 --> 00:23:39.759
But I don't know.
00:23:39.839 --> 00:23:48.960
I I think um with this, this is one of those things that I think woodworkers don't always realize can happen, even experienced woodworkers.
00:23:49.119 --> 00:24:01.359
Um, I'm not experienced to the point, you know, there's certainly people that are more experienced than me that's been doing this for 40 years, but um I consider myself an experienced woodworker at this point, and but I don't sometimes I don't even realize it.
00:24:01.519 --> 00:24:05.759
Sometimes, or I do realize it, but I just forget about it in the heat of the moment and I'm not paying attention.
00:24:06.079 --> 00:24:10.240
Wood is not like metal or plastic, it's not as stable.
00:24:10.400 --> 00:24:15.279
Metal isn't gonna move unless you really heat it up and bang it really hard, right?
00:24:15.440 --> 00:24:18.720
Plastic generally is not gonna move depending on the type of plastic.
00:24:18.799 --> 00:24:19.759
It's very stable.
00:24:20.000 --> 00:24:20.960
Wood is not.
00:24:21.279 --> 00:24:23.519
Wood can absolutely move.
00:24:23.680 --> 00:24:28.400
You cannot always expect it to just stay exactly where you put it.
00:24:28.640 --> 00:24:33.759
This can also change with, you know, I mentioned the environment and all that, but also how you're storing your wood.
00:24:33.920 --> 00:24:40.160
If it's leaning, then gravity is gonna be pulling that board into more of a lean, right?
00:24:40.240 --> 00:24:42.720
So that can cause the wood to bow like that.
00:24:42.880 --> 00:24:50.480
Um, sometimes you can do everything reasonably well with a project, and the material still can create a problem.
00:24:50.720 --> 00:24:53.839
That's just kind of the nature of the beast with working with wood.
00:24:53.920 --> 00:24:59.119
You can make all the plans that you want, but sometimes the wood has its own plans.
00:24:59.440 --> 00:25:00.079
All right.
00:25:00.240 --> 00:25:04.640
Um, let's talk about what might be, let me get to
my notes here.
00:25:05.519 --> 00:25:06.720
Uh, all right.
00:25:07.119 --> 00:25:15.039
The most uh the most heartbreaking woodworking disaster of all is screwing up the finish on a project.
00:25:15.119 --> 00:25:21.039
Because here's the thing: you can spend days building something, you can get the joinery right, everything fits, it looks beautiful.
00:25:21.119 --> 00:25:25.920
You spend time sanding everything, you've sanded it until your hands are freaking numb.
00:25:26.079 --> 00:25:31.519
Um, you're at the finish line, all you've got to do is apply the finish, and then something goes terribly wrong.
00:25:31.599 --> 00:25:35.920
And the stain comes out blotchy or spotted, if you will.
00:25:36.079 --> 00:25:40.160
Blotchy, bleeding, you know, some sparts are spots are darker than others.
00:25:40.319 --> 00:25:42.799
Um, you maybe missed a glue spot in your sanding.
00:25:42.880 --> 00:25:46.240
And by the way, if you don't know, stain does not stick to glue.
00:25:46.400 --> 00:25:53.200
So if you have a piece, uh a spot that is dried glue, you will see it really bad once you put stain on it.
00:25:53.440 --> 00:26:01.599
Um, maybe when you did the sanding, some of the dust from the sanding lands in your finish as it's trying to cure.
00:26:01.759 --> 00:26:04.319
Maybe you get runs or drips in your finish.
00:26:04.400 --> 00:26:07.759
And when I say finish, it can be clear coat, stain, paint, whatever.
00:26:07.920 --> 00:26:14.240
Um, or maybe you just apply something and realize that you absolutely hate how it looks on the project.
00:26:14.319 --> 00:26:20.559
And then suddenly uh that project that you thought was finished has another three days of work ahead of it.
00:26:20.799 --> 00:26:24.400
Talk about being deflating and demotivating.
00:26:24.960 --> 00:26:38.240
Glue spots are a big one for me because they you you can maybe not see it with your eye, but if you questionably didn't sand that spot very well, you will find them when you put sand uh stain on there.
00:26:38.400 --> 00:26:41.440
They only show up once stain is applied.
00:26:42.000 --> 00:26:44.559
And um yeah, blotchy stain.
00:26:44.640 --> 00:26:53.599
If you don't mix your stain, you you think stain doesn't have to be mixed like paint, and I guess it doesn't like paint, but stain needs to be mixed up, it needs to be shaken very well.
00:26:53.839 --> 00:27:02.319
Um yeah, it can be blotchy depending on how the different grains and the different parts of the wood itself accept that stain.
00:27:02.480 --> 00:27:05.519
Um, and then uh yeah, I mentioned dust contamination.
00:27:05.599 --> 00:27:11.039
If there's dust in your shop and you're putting stain down and there's dust in the air, that dust is gonna land somewhere.
00:27:11.200 --> 00:27:14.880
Gravity is gonna bring it back down, and it's probably gonna bring it back down into your stain.
00:27:15.039 --> 00:27:17.279
And uh that's not a good time.
00:27:17.359 --> 00:27:19.119
That that's uh yeah.
00:27:19.440 --> 00:27:21.759
Runs, drips, I mentioned those too.
00:27:21.920 --> 00:27:28.880
Um the the rule of thumb with applying finish is do a lot of really light coats instead of doing one heavy coat.
00:27:29.039 --> 00:27:33.200
I always thought this was kind of gimmicky because you hear everybody, every woodworker say it.
00:27:33.279 --> 00:27:36.319
I did multiple light coats and you're like, man, screw that, I want to get done.
00:27:37.039 --> 00:27:38.960
And you do one really heavy coat.
00:27:39.200 --> 00:27:41.920
No, I promise you, do the light coats.
00:27:42.000 --> 00:27:42.480
It works.
00:27:42.559 --> 00:27:44.480
There's a reason why everybody says that.
00:27:44.640 --> 00:27:50.160
Um, yes, it's more work, but it will look night and day difference when the project gets done.
00:27:50.400 --> 00:27:57.039
Um I think part of the problem with finishing, though, is that finishing a project obviously comes at the end of a project.
00:27:57.119 --> 00:28:02.240
And by that point, you're you're kind of tired of working on that project.
00:28:02.400 --> 00:28:03.279
You want to be done.
00:28:03.440 --> 00:28:07.759
So there is that temptation that I talked about to want to rush and just get it done.
00:28:08.079 --> 00:28:12.240
And frankly, though, that's probably the worst time to start rushing.
00:28:12.400 --> 00:28:24.400
That's probably when you need to slow down the most because again, you can spend all this time on a beautiful$10,000 kitchen walnut table, walnut kitchen table.
00:28:24.640 --> 00:28:27.359
Um, but now you just messed up the finish.
00:28:27.519 --> 00:28:31.519
So now you have five days of sanding all that finish back off.
00:28:32.240 --> 00:28:33.279
Like, oh my gosh.
00:28:33.440 --> 00:28:37.599
No, you can ruin all of your hard work with poor finish.
00:28:37.759 --> 00:28:45.599
And I, you know, I think the lesson here is that finishing isn't just the last step of woodworking, it's an entire skill of its own.
00:28:45.759 --> 00:28:51.839
There's people that spend time learning the skill of just applying finish and what finish to use and how to apply it.
00:28:52.079 --> 00:28:57.839
You can take classes on just wood finishing, not woodworking, just the finishing part.
00:28:58.160 --> 00:29:04.319
And I think the reason is because sometimes it does deserve as much attention as the construction itself.
00:29:04.559 --> 00:29:11.440
Nothing will humble a woodworker faster than ruining a beautiful project with a bad finish.
00:29:11.920 --> 00:29:12.319
100%.
00:29:12.720 --> 00:29:13.440
It's happened to me.
00:29:13.519 --> 00:29:15.680
It'll probably happen to you if it hasn't already.
00:29:15.839 --> 00:29:16.160
Right?
00:29:16.400 --> 00:29:16.960
All right.
00:29:18.319 --> 00:29:25.279
Here's something that is almost guaranteed to happen to some some of you know some of us at some point.
00:29:25.440 --> 00:29:31.440
You make a mistake, and it can even be not that big, maybe a small,
not a huge mistake.
00:29:31.599 --> 00:29:36.960
Um, it's something that you can probably fix, and so you start fixing it.
00:29:37.039 --> 00:29:39.279
Um, but then somehow this creates another problem.
00:29:39.440 --> 00:29:49.519
So you fix that problem, and then that creates another problem, and you see where I'm saying, you next thing you know, you're spending three hours trying to fix something that would have taken 20 minutes to just remake it in the first place.
00:29:49.759 --> 00:30:02.079
Maybe you're trying to salvage parts that really should just be remade, and you spend all this time trying to salvage and save the pieces that you messed up when you could just go remake the parts over again, right?
00:30:02.160 --> 00:30:09.119
Um, maybe you're making design changes to your project to hide mistakes, but those design changes are pretty unnecessary.
00:30:09.279 --> 00:30:19.200
You know, now your bench is like I I keep going back to this bench example, but now it's like this awkward width where it can't, it's not a one-person bench, but it's too small to be a two-person bench, too, right?
00:30:19.279 --> 00:30:23.359
It design changes that that's what I mean, they could be unnecessary.
00:30:23.680 --> 00:30:32.640
Um or maybe when you're trying to salvage those pieces and you're trying to make corrections and adjust your project, you're removing too much material now.
00:30:32.799 --> 00:30:39.119
So now you're really screwed and you have to remake the dang thing anyway when you should have just remade it to begin with.
00:30:39.359 --> 00:30:48.640
Uh there's repairs maybe that happen that you try to try to do on the project that compromise the appearance of the project, not just the functionality, but the way it actually looks.
00:30:48.720 --> 00:30:50.079
Now it looks like crap.
00:30:50.240 --> 00:30:59.279
And by the time you've done all this, you've quote unquote, this is an analogy, but you've whittled your piece of wood so small that it's not good for anything.
00:30:59.519 --> 00:31:01.200
And so now you have to start over.
00:31:01.519 --> 00:31:10.559
It's like, hey, just start over or just remake that that one part that would have saved you these other five steps of having to remake all these other parts.
00:31:11.359 --> 00:31:12.000
Breathe.
00:31:12.319 --> 00:31:13.359
Slow down a little bit.
00:31:13.519 --> 00:31:14.559
This isn't cancer.
00:31:14.880 --> 00:31:17.440
We're gonna get it done and let's just do it the right way.
00:31:17.599 --> 00:31:26.480
Sometimes you have to know when to stop, when to just breathe and say, all right, this sucks, but here's how I'm gonna do it.
00:31:26.559 --> 00:31:27.920
I'm gonna do the right thing and keep it going.
00:31:28.079 --> 00:31:35.920
Sometimes we get so um determined to save a piece of wood that we completely lose sight of how much time we're wasting.
00:31:36.000 --> 00:31:36.720
And I get it.
00:31:36.880 --> 00:31:38.720
Nobody wants to throw away a piece of hardwood.
00:31:38.799 --> 00:31:47.599
I talked about that in a previous episode, but sometimes the smartest thing that you can do is admit that the piece is ruined, you've messed it up, and you need to make another one.
00:31:48.160 --> 00:31:56.319
Of course, being woodworkers though, we're not actually going to throw away a ruined piece, we're gonna put it in the scrap pile because we might need it someday.
00:31:56.480 --> 00:31:57.599
I talked about that, right?
00:31:57.680 --> 00:31:58.960
I've I've talked about that at length.
00:31:59.119 --> 00:32:05.039
Sometimes the best way, though, to fix a woodworking mistake is to stop trying to fix that mistake.
00:32:05.680 --> 00:32:06.240
All right.
00:32:06.640 --> 00:32:16.000
I want to talk about something that I think has contributed to unrealistic expectations about woodworking, and that is YouTube.
00:32:16.559 --> 00:32:16.880
Okay.
00:32:17.200 --> 00:32:21.279
And I've hinted around this conversation, this topic on previous episodes.
00:32:21.920 --> 00:32:32.799
I say that as I I say I'm making this statement as someone who's been making woodworking videos for years, obviously.
00:32:32.880 --> 00:32:35.279
So it's a little bit of the pot call in the kettle black, right?
00:32:35.359 --> 00:32:37.599
I'm I'm wanting the cake and I want to eat it too.
00:32:37.680 --> 00:32:45.200
Um, but when you watch a woodworking video, you're usually seeing a condensed version of the entire project.
00:32:45.359 --> 00:32:53.200
Maybe the video is 10, 15, 20 minutes long, but the actual project might have taken several days or several weeks to build.
00:32:53.359 --> 00:33:03.759
Um, and you're not necessarily seeing in that condensed 10 to 15 minute video all the little problems and little decisions and little changes that that person had to go through and what they dealt with along the way.
00:33:03.920 --> 00:33:07.119
So please do not compare yourself to a video.
00:33:07.359 --> 00:33:12.960
They say on that video you can get it done in the afternoon, and it's a 15-minute video, so you think it's believable.
00:33:13.279 --> 00:33:19.839
But maybe it took them four days because they were gonna do it in the afternoon, but they ran into all these problems that I just got done talking about.
00:33:20.000 --> 00:33:20.720
I don't know.
00:33:20.880 --> 00:33:28.559
Editing videos can remove the downtime and they remove the repetitive tasks, the things that are gonna take you time in real life.
00:33:28.720 --> 00:33:34.480
The videos also don't show the setup, they don't show the cleanup, they don't show the shopping for materials, they don't show all of these things.
00:33:34.640 --> 00:33:38.240
And I'm not saying that woodworking YouTubers are trying to deceive anybody.
00:33:38.319 --> 00:33:39.279
I don't think they are.
00:33:39.440 --> 00:33:41.119
It's just the nature of making videos.
00:33:41.200 --> 00:33:53.200
They're trying to make good videos, they're trying to produce, it's a
production, they're trying to produce a good video because the average viewer on YouTube does not want to watch 45 minutes of someone sanding a box.
00:33:53.359 --> 00:33:54.720
So that gets condensed down.
00:33:54.799 --> 00:34:00.319
They edit that out, and that gets condensed down to a five-second clip, but it's really 45 minutes in real life.
00:34:00.480 --> 00:34:14.719
And um I do think though that this can create an impression on the viewer that woodworking is a lot easier and faster than it actually is, especially for beginners that are naive and don't necessarily know.
00:34:14.960 --> 00:34:19.679
And um just, you know, toot my own horn for a second.
00:34:19.920 --> 00:34:21.760
Shameless plug, as the kids say.
00:34:21.920 --> 00:34:33.840
I think that's one of the things that I like about what I'm doing here on this podcast, the scrap pile, because I can talk about these things that don't always make it into the project videos.
00:34:34.000 --> 00:34:35.679
Um, I can talk about it at length.
00:34:35.760 --> 00:34:36.880
I'm a talker, you know that.
00:34:36.960 --> 00:34:55.360
I mean, we've been going for what, 35 minutes and I've been rambling on, but I can talk about these mistakes, these frustrations, the things that went wrong, and the lessons learned along the way that you do not see in the video because I think these things are just as much a part of woodworking as the actual finished project is.
00:34:55.599 --> 00:35:00.000
A 10-minute woodworking video doesn't mean that it was a 10-minute woodworking project.
00:35:00.079 --> 00:35:01.280
That goes without saying.
00:35:01.519 --> 00:35:07.119
So, what do you do when a project does start to go wrong on these things that I've mentioned?
00:35:07.199 --> 00:35:16.159
I think one of the biggest differences between a beginner and someone who's been doing woodworking for a while, because it's not necessarily that experienced woodworkers make fewer mistakes.
00:35:16.320 --> 00:35:19.599
No, they they probably make the same amount of stakes.
00:35:19.679 --> 00:35:24.800
It's just that they've gotten better at figuring out what to do when something does go wrong.
00:35:25.039 --> 00:35:30.000
Um when when you know, you know, you you use when something goes wrong, you have three choices.
00:35:30.079 --> 00:35:34.480
You can either fix it, you can start over, or you can just walk away completely and stop the project.
00:35:34.639 --> 00:35:42.480
And this that one generally happens when you're frustrated, you're tired, or you're rushing, and you know that when you're rushing, it's likely to make things worse on the project.
00:35:42.639 --> 00:35:50.400
Um, I think that one is the hardest because uh the the walking away one, because you want again, you're frustrated.
00:35:50.639 --> 00:35:55.679
There's this temptation to just keep pushing, kind of slam your hammer down and keep going.
00:35:55.840 --> 00:36:04.719
You want to fix the problem, you want to finish the project,
you don't want to admit defeat, even even if it's internally, you have a pride thing, you don't want to just give up.
00:36:04.800 --> 00:36:11.280
But sometimes the best thing you can do is just turn off your tools, shut the lights off, walk out of the shop, and come back tomorrow.
00:36:11.519 --> 00:36:14.159
Um, you view the project differently, right?
00:36:14.239 --> 00:36:15.519
You sometimes view life differently.
00:36:15.599 --> 00:36:17.360
You're so in a bad headspace, right?
00:36:17.440 --> 00:36:19.119
You get you view life differently.
00:36:19.360 --> 00:36:28.159
But um, yeah, I mean, I can't tell you how many times that seemed impossible for me one evening.
00:36:29.039 --> 00:36:36.880
Uh, but then suddenly I have an obvious solution to this problem the next morning, just by a deep breath, a night of sleep, whatever.
00:36:37.039 --> 00:36:44.079
Sometimes the most productive thing that you can do your work in your workshop is to leave it and just come back, right?
00:36:44.400 --> 00:36:45.039
Um, all right.
00:36:45.199 --> 00:37:03.280
After spending this entire episode talking about everything that goes wrong in woodworking, I do want to end on something that's a little bit more positive because as frustrating as these mistakes can be, I also think that they're the one of the most valuable parts of learning to be a woodworker, of learning the craft and the skill of woodworking.
00:37:03.519 --> 00:37:08.960
If you're watching this and you're a woodworker, think about the woodworking lessons that you remember the most.
00:37:09.199 --> 00:37:12.559
Chances are a lot of them came from screwing something up.
00:37:12.960 --> 00:37:15.119
Probably all of them came from screwing something up.
00:37:15.360 --> 00:37:17.519
You remember the board that you cut too short.
00:37:17.679 --> 00:37:19.920
You remember the glue up that went horribly wrong.
00:37:20.000 --> 00:37:23.679
You remember the finish that you ruined on a project.
00:37:23.760 --> 00:37:28.159
And the next time you encounter that situation, you had flashbacks to that bad experience.
00:37:28.239 --> 00:37:30.559
And so you were better prepared, right?
00:37:30.639 --> 00:37:33.760
That that time, the current time that you are working on.
00:37:33.920 --> 00:37:46.239
Um, I think that woodworkers do put a lot of pressure on themselves, maybe even too much pressure at times to get everything right, especially when we're, again, watching people online who make woodworking just look absolutely effortless.
00:37:46.480 --> 00:37:51.679
But no one becomes or has become a good woodworker without making mistakes.
00:37:51.840 --> 00:37:52.880
That goes without saying.
00:37:53.039 --> 00:37:53.760
Everybody knows that.
00:37:53.920 --> 00:37:56.800
You have to build things, you have to screw things up.
00:37:56.960 --> 00:37:59.440
Just get your repetitions in, right?
00:37:59.760 --> 00:38:04.559
The biggest bodybuilder in the world had no idea how to do a deadlift until he did one.
00:38:04.800 --> 00:38:05.679
You see what I'm saying?
00:38:05.760 --> 00:38:06.719
Like repetition.
00:38:06.880 --> 00:38:07.920
Keep going, keep going.
00:38:08.000 --> 00:38:11.119
You have to figure out how to make them better.
00:38:11.280 --> 00:38:15.920
Um, a good woodworker is not somebody who never makes mistakes.
00:38:16.079 --> 00:38:16.719
I've said that.
00:38:16.880 --> 00:38:19.760
It's someone who knows what to do when they do make a mistake.
00:38:20.000 --> 00:38:25.920
So I guess the conclusion that I've come to is that woodworking projects are probably never gonna go exactly according to plan.
00:38:26.079 --> 00:38:30.559
I haven't had one that goes exactly according to plan, and I've been woodworking for nine years.
00:38:30.719 --> 00:38:35.199
You no matter again, no matter how long you've been doing this, something's eventually going to go wrong.
00:38:35.360 --> 00:38:49.440
You're gonna mess something up, you're gonna cut something too short, you're gonna apply a finish that just did not turn out the way that you wanted it to, and you're probably gonna spend a way more, you're gonna spend way more time um on a project than you originally expected.
00:38:49.519 --> 00:38:51.519
But that's just woodworking.
00:38:51.679 --> 00:38:53.440
That's how this works.
00:38:53.679 --> 00:39:00.639
So, what I would like to know if you're listening or watching this is what's the biggest mistake you've ever made in woodworking?
00:39:00.960 --> 00:39:04.480
Leave a comment, message me, whatever you want to do, let me know.
00:39:04.639 --> 00:39:05.280
Did you fix it?
00:39:05.440 --> 00:39:06.480
Did you have to start over?
00:39:06.559 --> 00:39:08.880
How much did it cost you, time and dollars-wise?
00:39:09.039 --> 00:39:10.559
Let me know in the comments.
00:39:10.719 --> 00:39:14.880
Let me know what kind of content you want me to make next on the scrap pile.
00:39:14.960 --> 00:39:19.760
You can DM me, you can find me on my website, you can leave a comment, whatever it is.
00:39:19.920 --> 00:39:23.519
My website, by the way, is RockyRiverwoodworks.com.
00:39:23.760 --> 00:39:26.639
Again, you can message me on there, you can comment if you're here on YouTube.
00:39:26.960 --> 00:39:28.559
Be sure to like, comment, and subscribe.
00:39:28.639 --> 00:39:31.840
Leave a five star review on your podcast player wherever you're listening from.
00:39:32.000 --> 00:39:35.039
Thanks for hanging out with me, and I will catch you guys on the next one.
00:39:35.199 --> 00:39:36.079
Take care.