TRANSCRIÇÃO 🔗
WEBVTT
00:00:00.479 --> 00:00:02.160
What is going on, everybody?
00:00:02.319 --> 00:00:07.440
Welcome back to another episode of the Shooter's Apprentice Podcast.
00:00:08.000 --> 00:00:11.839
So we're just gonna do this episode, gonna be kind of a shorter episode today.
00:00:11.919 --> 00:00:13.599
I didn't really have anything to talk about.
00:00:13.759 --> 00:00:14.640
I've been super busy.
00:00:14.720 --> 00:00:18.000
We're getting ready to do a bunch of oversized moves with work.
00:00:18.079 --> 00:00:25.199
So I've been running hard and then working on the truck, trying to get it more geared up and ready for some hard runs here for a bit.
00:00:25.440 --> 00:00:27.760
So I haven't done a whole lot of shooting this week.
00:00:28.079 --> 00:00:33.359
The only thing I have really played with is this 500JRH, so we're gonna talk about that a little bit today.
00:00:34.240 --> 00:00:37.679
But first I want to talk about the podcast a little bit.
00:00:37.920 --> 00:00:48.159
Since I've started doing it as the video format, it seems that most of you have moved over to watching on the YouTube side, and that's great.
00:00:48.320 --> 00:00:50.719
I way more enjoy doing this as a video.
00:00:50.799 --> 00:00:58.320
Uh it's way I enjoy doing it more as a video, but I also really like the editing of the video a lot.
00:00:58.399 --> 00:01:01.840
It's just a lot easier for me, not being a computer person and all that kind of stuff.
00:01:01.920 --> 00:01:05.599
I just find the videos a lot easier to deal with.
00:01:06.079 --> 00:01:12.239
But since we have started doing the videos, the podcast downloads have cut in half.
00:01:12.319 --> 00:01:13.840
Now the YouTube views have gone up.
00:01:13.920 --> 00:01:24.640
You know, we're getting somewhere in about a thousand thousand views a week on YouTube, which is great compared to you know the three or four hundred we'd get on top you know, top end on the podcast.
00:01:29.840 --> 00:01:38.799
I don't really ever expect it to grow too much beyond what we got going on right now, but it has probably doubled since we went over to the YouTube side.
00:01:38.879 --> 00:01:47.359
Uh, it stayed about the same since we started doing it on YouTube, uh, as far as the YouTube views go, but the podcast downloads have cut in half.
00:01:47.439 --> 00:01:58.959
I'm not sure if that's just it's harder to listen to because of it being video based now and the audio side is just not very good, or if more of the viewers have just moved over to YouTube.
00:01:59.760 --> 00:02:01.840
Either way, we're gonna continue with the videos.
00:02:01.920 --> 00:02:12.400
I'm actually kind of working on a format to kind of do this, kind of revamp it from the ground up, as uh and no focusing primarily on the video side.
00:02:12.560 --> 00:02:17.120
So for those of you who watch on YouTube, let me know things that you guys would like to see.
00:02:17.199 --> 00:02:25.919
Maybe if we kind of break it into segments like we used to, or do more show and tell, or whatever there, and then those of you who still listen to the audio side, let me know.
00:02:26.080 --> 00:02:28.800
Did you quit listening to the audio side because it's just terrible?
00:02:28.960 --> 00:02:33.520
I do I do know I have noticed I talk a little bit too fast for the audio.
00:02:33.680 --> 00:02:42.000
I'm gonna when I'm doing videos because it just flows a little bit better when I talk fast, but with the like I'm just talking normal right now, doing videos.
00:02:42.080 --> 00:02:51.680
When I used to have to record the podcast, I really had to slow down and talk more like this to make the audio turn out better.
00:02:51.840 --> 00:02:57.039
And maybe I need to work on trying to talk slower on the video as well.
00:02:57.199 --> 00:03:02.240
It's just a little bit harder for me to do that when I'm just sitting here talking to the camera.
00:03:02.400 --> 00:03:03.599
So, like I said, let me know.
00:03:03.680 --> 00:03:10.560
Did you quit listening to the audio side just because the audio side kind of sucks now, or because you moved over to watching the YouTube version?
00:03:10.719 --> 00:03:12.319
We're not gonna do away with the audio.
00:03:12.400 --> 00:03:17.360
It does cost me about 25-30 bucks a month to keep the audio version alive.
00:03:17.599 --> 00:03:22.960
But I know some of the oldest fans or some of the oldest followers don't have time to watch YouTube.
00:03:23.039 --> 00:03:28.400
They've told me I can only do this as audio because I do it at work or when I'm driving or whatever.
00:03:28.719 --> 00:03:39.039
And just because the podcast guys have been so loyal and I'm not gonna do away with the audio version, but we are going to shift into focusing more on the video.
00:03:39.439 --> 00:03:42.479
So, that being said, let's go ahead and move into this week.
00:03:42.719 --> 00:04:06.960
You guys cost me money this week, and not necessarily the YouTubers, because I think this was an Instagram post or a Facebook post I made where we were talking about the 500 JRH, and I made a comment that so far the 500 JRH is smoking any test loads I've compared it to in the 500 Smith and Wesson.
00:04:07.360 --> 00:04:10.800
And oh my god, the comments were you don't know what you're talking about.
00:04:10.960 --> 00:04:14.080
The 500 Magnum's way bigger, and blah blah blah blah blah.
00:04:14.240 --> 00:04:19.839
You didn't try Buffalo Boar, whatever, whatever your preferred brand of ammo was.
00:04:20.319 --> 00:04:23.680
And that's what we're gonna talk about today, and we'll talk about why.
00:04:23.839 --> 00:04:37.199
But what happened was is I went down to the gun store with the intention of buying a box of Buffalo Boar and a box of Underwood 440 grain, 500 Smith and Westons where we could, you know, test the good brands or whatever.
00:04:37.519 --> 00:04:46.480
And I am sorry guys, I am not spending a hundred and some odd dollars, like$130 a box for Buffalo 500 Smith and Weston.
Load full transcript
00:04:46.560 --> 00:04:48.160
I'm just I cannot afford that.
00:04:48.399 --> 00:04:52.800
I know you guys are gonna look at me and oh, you buy guns all the time and reloading components.
00:04:52.879 --> 00:04:58.079
Yeah, but I don't, I'm not spending$120 to go out and test some velocity.
00:04:58.160 --> 00:04:59.600
I I can't afford that.
00:04:59.839 --> 00:05:06.480
But what did happen is I walked in there and the manager of the store there was like, hey, I got something for you.
00:05:06.560 --> 00:05:09.120
And he walks into the back and he walked out with this.
00:05:09.439 --> 00:05:15.600
And this is a Cole Police Positive 38 special that was built in 1928.
00:05:16.079 --> 00:05:19.199
And he said it's broken, would you would would you be interested in buying it?
00:05:19.279 --> 00:05:22.079
And I was like, Yeah, I'm always interested in broken guns.
00:05:22.240 --> 00:05:24.079
So he made me a really good deal on it.
00:05:24.160 --> 00:05:30.639
I'm not gonna say how good of a deal is, but Alaska Ammo here in Fairbanks has been really good to me, as well as iron and wood.
00:05:30.879 --> 00:05:38.879
But Alaska Ammo has uh they always make me really good deals on stuff, and he made me a phenomenal deal on this gun, and his other one will talk about that one here in a minute.
00:05:39.120 --> 00:05:43.759
Now, the issue with this gun is when you'd cock it, the cylinder wouldn't rotate.
00:05:44.079 --> 00:05:45.920
And or at least that's what he told me.
00:05:46.000 --> 00:05:54.720
And I popped this, I topped the cylinder open and looked at it, and you could see that the extractor was about halfway, about a half a turn off.
00:05:54.800 --> 00:05:59.839
It was so that the the arms on the extractor were in the middle of the chambers.
00:06:00.160 --> 00:06:01.519
And he's like, What do you see?
00:06:01.600 --> 00:06:02.319
Is the hand not working?
00:06:02.399 --> 00:06:04.639
And I was like, No, no, no, the hand's working.
00:06:05.360 --> 00:06:06.560
There's something going on with the star.
00:06:06.639 --> 00:06:12.319
And I sat there right here, right there in front of him, and we tightened the extra tightened the uh the star up, and what do you know?
00:06:12.399 --> 00:06:13.040
The thing works fine.
00:06:13.120 --> 00:06:20.399
And he still kept to the original deal that we that he'd offered it to me for, uh, even though we we fixed it right then and there.
00:06:20.720 --> 00:06:21.839
It's a pretty cool gun.
00:06:21.920 --> 00:06:24.560
This is actually a I'm not sure what country this went to.
00:06:24.639 --> 00:06:28.480
It's marked on the butt here, number A2580.
00:06:28.879 --> 00:06:41.839
The serial number for this gun puts it in 1928, and then it's marked on the bottom of the barrel here, CIA S T A L B V T, which is Sentry Arms International in Vermont.
00:06:42.079 --> 00:06:51.199
So this gun went, whether it went overseas or South America or Canada or somewhere, that got re-imported back from the United
States.
00:06:51.439 --> 00:06:55.839
It's it's it's definitely got some holts to wear, but overall the thing's actually in pretty good shape.
00:06:56.000 --> 00:06:59.279
It locks up nice and tight, you know, just like these old colts do.
00:06:59.600 --> 00:07:05.519
The timing on it is is pretty much perfect, which colts are pretty bad about the timing.
00:07:05.839 --> 00:07:09.040
Uh if they get shot a lot, the timing uh coming going out of time.
00:07:09.199 --> 00:07:16.319
And that's because of the way the colts work when you the the hand is is part of the trigger on these.
00:07:16.399 --> 00:07:19.360
So, like for those of you who are watching on YouTube, I'll kind of demonstrate.
00:07:19.439 --> 00:07:22.480
If we notice it's got a little bit of play in the cylinder, all cults are like that.
00:07:22.639 --> 00:07:25.439
When you cock it, there's still some play in the cylinder.
00:07:25.519 --> 00:07:38.079
Well, when you pull the trigger to the rear and drop the hammer, the cylinder locks up tight, and that's because the hand is actually connected to the trigger and it shoves harder into the into the ratchet when you pull the trigger.
00:07:38.319 --> 00:07:41.120
So the trigger and the arm are connected together.
00:07:41.279 --> 00:07:45.199
That's what works through double action, and then it locks the gun up tight.
00:07:45.360 --> 00:07:52.720
Well, what happens is over time pulling the trigger and pushing hard against that ratchet, it shortens the hand and they just they go out of time.
00:07:52.800 --> 00:07:55.439
Uh that's a it's one of the downsides to the Colt.
00:07:55.519 --> 00:08:02.319
They're not as robust as the Smith and Westons, in my opinion, when it comes to the timing.
00:08:02.800 --> 00:08:06.480
But this one's uh it times up the thing's actually in pretty dang nice shape.
00:08:06.560 --> 00:08:12.399
It doesn't really have any got some, it's got like a small amount of uh surface oxidation, maybe.
00:08:12.560 --> 00:08:14.720
But I think I mean it's it's just kind of the way it is.
00:08:14.879 --> 00:08:18.800
Katina, I guess, because it's an old gun, but it doesn't have any pitting or anything like that.
00:08:19.120 --> 00:08:21.600
You can still see pretty much all the machining marks on it.
00:08:21.759 --> 00:08:24.000
It's actually a really nice old gun.
00:08:24.240 --> 00:08:39.519
So, anyway, I'm gonna probably take this home this week, and I'm actually taking this weekend off for once to go home and try to get like I get and I'm like eight months behind on business paperwork and that kind of stuff, so I'm taking a couple days to spend at home, and I'm really hoping to get a chance to go out and shoot that gun tomorrow.
00:08:39.840 --> 00:08:43.600
We are having a really mild fall and early winter.
00:08:43.759 --> 00:08:45.440
I guess it's early winter here in Alaska.
00:08:45.519 --> 00:08:53.679
I mean, it this time last year it was like 30 below, and it's still been like I don't think it's
been below zero here in town yet.
00:08:54.159 --> 00:08:56.639
Mostly in the 30s, 20s, and 30s.
00:08:56.879 --> 00:08:59.679
So, anyway, he had another broken gun.
00:08:59.919 --> 00:09:01.759
Um, and he asked me if I was interested in it too.
00:09:01.840 --> 00:09:05.519
Now, this is just a Rossi Model 62 Winchester clone.
00:09:05.679 --> 00:09:07.840
They made a no nothing special here.
00:09:08.080 --> 00:09:09.039
They made a ton of these.
00:09:09.120 --> 00:09:13.440
I had one of these as a kid that I picked up at a gun show for like 50 bucks.
00:09:13.759 --> 00:09:17.759
And uh I shot that thing a ton, and the barrel on that one was actually loose.
00:09:17.840 --> 00:09:23.840
You could just grab the barrel and on thread it if it wasn't for the the the tube amounts.
00:09:24.159 --> 00:09:30.799
And we had a it had about 20 wraps of electrical tape around the barrel and tube in the front of the receiver to hold the barrel tight.
00:09:30.879 --> 00:09:32.159
Um, but I shot that thing a ton.
00:09:32.320 --> 00:09:35.600
I actually got pretty good at shooting running rabbits and grouse with it.
00:09:35.759 --> 00:09:42.320
Um really like pump action 22s, but this one is broken, and I don't know if this will show up on the camera or not.
00:09:42.399 --> 00:09:49.600
For those of you who are watching on YouTube, when we run the pump back and then run it back forward.
00:09:50.639 --> 00:09:51.919
I can do this there we go.
00:09:52.000 --> 00:09:53.519
No, I didn't do it that time.
00:09:53.840 --> 00:09:59.519
But normally when we when we run the pump forward, the the hammer will fall.
00:09:59.600 --> 00:10:00.720
Let's do it faster.
00:10:00.879 --> 00:10:01.360
Right there.
00:10:01.600 --> 00:10:06.240
Hammer will fall, and if we cock it manually, you can just push it off.
00:10:06.720 --> 00:10:09.120
So the sphere is a little bit too worn on that.
00:10:09.279 --> 00:10:13.360
We'll take it apart and see if we can reshape the sphere, or we might have to replace it.
00:10:13.440 --> 00:10:15.200
Either way, I got that super cheap too.
00:10:15.519 --> 00:10:17.440
It's actually in really nice shape.
00:10:17.919 --> 00:10:22.559
It is a newer Rossi 62, but it's not a pinned barrel on it.
00:10:22.799 --> 00:10:25.679
But uh anyway, that's not what we are here to talk about today.
00:10:25.759 --> 00:10:36.559
Today we're gonna talk about the 500 JRH, my initial thoughts on this BFR revolver, and some of my initial load testing and that kind of stuff.
00:10:36.799 --> 00:10:39.039
So let's talk about the BFR first.
00:10:39.840 --> 00:10:41.519
This is an awesome revolver.
00:10:41.679 --> 00:10:54.159
This thing is at the only issue I have had with this gun, if you notice right here at the front of the grip, I don't know if you'll even be able to see it on the camera, but on the very top corner of the grip here, the grip, these plastic grips did chip.
00:10:54.399 --> 00:10:56.799
Uh, just from high and heavy recoil and that kind of stuff.
00:10:56.879 --> 00:10:57.840
I'm not upset about it.
00:10:57.919 --> 00:11:01.440
I'll probably just take a Dremel tool and just kind of round off the corners.
00:11:02.320 --> 00:11:08.000
One downside to the BFRs, I found that there is nobody that makes grips for these.
00:11:08.240 --> 00:11:22.639
So I'm either if you want something aftermarket, or you either have to send it to somebody like uh Zane Thompson or something like that to have grips made for it because there's pretty much no just like off the shelf like there is for the Rugers.
00:11:23.440 --> 00:11:31.360
But again, with Rugers, if you want grips fit right, you really need to send them the grip frame and have them fit because there's so much variance in Ruger grip frames.
00:11:31.440 --> 00:11:33.440
I don't know if that's going to be the case with the BFRs.
00:11:33.600 --> 00:11:35.679
I haven't tried swapping different grips on them.
00:11:35.840 --> 00:11:38.159
But Ruger grip frames are actually pretty terrible.
00:11:38.320 --> 00:11:43.519
You can have two guns that are the two serial numbers off from each other, and the grip frames will be different.
00:11:43.759 --> 00:11:47.360
But as far as the gun goes, man, I absolutely love this gun.
00:11:47.519 --> 00:11:54.799
It is super tight, but not to the point like Freedom Arms, where if you get a little bit of dirt in there, they could they quit working when they get dirty or anything like that.
00:11:54.879 --> 00:11:57.519
But way tighter than a Ruger, better trigger.
00:11:57.679 --> 00:12:01.519
The throats and the rifling on this thing, it shooting cast bolts.
00:12:01.679 --> 00:12:06.320
I'm getting no letting in the throats or the forcing cone, like the forcing cone on it is just beautiful.
00:12:06.480 --> 00:12:12.720
501 throats, 500 bullet groove diameter, just an absolutely phenomenal pistol.
00:12:12.879 --> 00:12:16.000
I could not be more tickled with this BFR.
00:12:16.159 --> 00:12:28.720
As a matter of fact, I like this BFR so much that if if I was younger and not making as much money as I do now, I would probably sell all of my rugers to buy a couple more BFRs.
00:12:28.879 --> 00:12:30.000
I'm not going to do that.
00:12:30.080 --> 00:12:33.039
I'm going to keep my rugers, but I am going to buy some more BFRs.
00:12:33.120 --> 00:12:37.759
I'm going to have, I think I'm going to do a custom at some point when I have a little extra money.
00:12:37.919 --> 00:12:41.440
I'd like to do a custom octagon barrel 454.
00:12:41.679 --> 00:12:46.320
I'm probably going to get a 5.5 inch just like this and 44 Magnum.
00:12:46.559 --> 00:12:49.759
And got a couple other ideas for some other ones I'd like to have too.
00:12:49.919 --> 00:12:52.159
But these are absolutely phenomenal guns.
00:12:52.240 --> 00:13:00.879
Um it's out it's honestly a kind of a shame how much nicer these are than a Ruger, considering how much Rugers cost, because Rugers are not cheap anymore.
00:13:00.960 -->
00:13:07.200
They used to be, you know, Rugers are 900 bucks now for single actions up here, and these are, you know, 14, 15.
00:13:07.519 --> 00:13:15.200
I mean, no, they're I mean half, uh one and a half times the price of a Ruger, but they're just so much nicer than a Ruger is.
00:13:15.279 --> 00:13:17.039
Uh, it is big, it is heavy.
00:13:17.279 --> 00:13:22.000
It's not really that much bigger than a Ruger overall size, but there is it is heavier.
00:13:22.080 --> 00:13:24.639
There's more steel, it's got a steel grip frame.
00:13:24.799 --> 00:13:32.240
But when you're shooting calibers like the 500 JRH, that is a good thing because this is a high recoiling round.
00:13:32.559 --> 00:13:41.200
So I've run into some hurdles with the 500 JRH cartridge because of the my loading techniques.
00:13:41.279 --> 00:13:50.799
Now, part of my reason for being interested in the JRH instead of a 500 line ball was that I already had a ton of 500 Smith Wesson stuff.
00:13:50.879 --> 00:14:00.080
I have a 500 bullet mold, I have a ton of 500 Smith and Wesson brass, I've got some jacket, I've got almost a thousand jacket and 50 caliber 500 bullets.
00:14:00.399 --> 00:14:12.240
And that was part of the reason for me to go with the with the JRH instead of a line ball, was that I would be able to use that 500 Smith Wetson stuff that I don't really use in the 500 Smith Wesson because I don't like the Smith Wesson X frames.
00:14:12.399 --> 00:14:34.320
I do have a Bighorn Armory 500 Smith Wesson lever action rifle, and I haven't really played with that enough to uh I need to work with that rifle and rifle powders because the thing is just brutal to shoot, shooting full charge H110 loads like 500 Smith Wesson type loads, and there's no rifle data out there.
00:14:34.480 --> 00:14:47.039
I don't see any reason why we couldn't use 4570 and 50 Alaskan powders in that and get not only higher performance because the performance from the rifle with the loads I was shooting wasn't really all that awesome.
00:14:47.360 --> 00:15:01.919
My 4570 loads smoke it, and I think we'd get better performance, and I think we'd get gentler recoil using something like reloader 7 or maybe even just a little bit faster than that, something that we would normally use in Marlin only 4570 loads.
00:15:02.080 --> 00:15:06.000
But either way, I don't really reload for the 500 Smith Wesson that much.
00:15:06.159 --> 00:15:10.399
So there was a couple of things that when I moved into the JRH, I didn't have.
00:15:10.639 --> 00:15:24.080
And there's a when you move into the 50 calibers, there is some dedication that comes with that because most standard reloading equipment, and all of us use case trimmers as an example, de burring tools stop at 45 caliber.
00:15:24.720 --> 00:15:34.320
And like for my trimmer, I had to buy a new cutter, I had to buy a new pilot, I had to buy a new case holder, and that stuff gets expensive.
00:15:34.480 --> 00:15:42.080
Now, again, one of my justifications for the JRH was that I had about I don't know, 600 pieces of 500 Smith and Less in brass.
00:15:42.240 --> 00:15:48.000
I don't know that calling the JRH a wildcat is really correct because it is a factory.
00:15:48.080 --> 00:15:56.960
I mean, there's obviously factory revolvers chambered in this, and you can buy factory ammo, but only from Buffalo Boar.
00:15:57.519 --> 00:16:07.600
And Starline makes properly spec 500 JRH brass only available from Buffalo Boar.
00:16:07.679 --> 00:16:12.240
Tim Sundals has some kind of agreement with Starline where they only sell the brass to him.
00:16:12.320 --> 00:16:12.799
That's fine.
00:16:12.960 --> 00:16:14.639
He probably invested a lot of money into it.
00:16:14.720 --> 00:16:20.799
I get why, but one of my justifications was like I've already got a ton of 500 Smith and Wesson brass.
00:16:20.879 --> 00:16:23.919
I'm just going to trim these down and be on my way.
00:16:24.080 --> 00:16:26.320
Well, it's not really quite that simple.
00:16:26.639 --> 00:16:29.679
And I've got a hand, I got a handful of loaded cartridges here.
00:16:29.840 --> 00:16:31.759
So let's talk about the brass first.
00:16:31.840 --> 00:16:37.679
I tried, I cut down and used Starline, Corbon, and Winchester brass.
00:16:37.840 --> 00:16:46.000
I didn't have any Hornley brass, but I cut down just a few of each to see which one would be best after I started having some issues with the Starline Brass.
00:16:46.080 --> 00:16:48.639
And it turns out the Starline Brass is the best.
00:16:48.799 --> 00:16:52.480
Again, I haven't tried the Hornity brass because I don't have this, I couldn't find any.
00:16:52.639 --> 00:17:00.159
And again, I'm not going to spend$100 on a box of Hornley ammo to shoot them up and see if the brass is better than a Starline.
00:17:00.639 --> 00:17:05.599
So the issue we're having here, so the 500 Smith Wesson start to thicken up.
00:17:05.839 --> 00:17:12.880
Any brass does, but the 500 Smith Wesson here that we're talking about gets pretty thick down here towards the middle of the cartridge.
00:17:13.359 --> 00:17:22.240
Now, the JRH cases just have a little bit thinner walls and they have pistol primer pockets, plus the rim is turned down just a little bit more.
00:17:22.720 --> 00:17:27.920
The actual specs for the JR have a slightly smaller rim than 500 Smith and Wesson.
00:17:28.079 --> 00:17:30.640
If you're shooting something like a Freedom Arms, that is an issue.
00:17:31.200 --> 00:17:35.359
Trim down 500 Smith and Wesson brass won't fit in it without working on the rim.
00:17:35.440 --> 00:17:37.680
With the BFR, that's not a problem.
00:17:37.759 --> 00:17:39.839
We're only talking about like six thousandths.
00:17:40.000 --> 00:17:48.720
It's not much, but the tolerances on the Freedom Arms are so tight that they won't chamber without taking six thousandths off of the rim.
00:17:48.960 --> 00:17:51.599
The BFR is not a problem.
00:17:51.680 --> 00:17:52.559
They chamber fine.
00:17:53.039 --> 00:18:00.160
Even though it has recessed case heads or recessed chambers, the 500 Smith Wesson brass works fine.
00:18:00.240 --> 00:18:10.960
The issue I am having is that the expander plug on my RCBS dies is filled with, it's making a ring right here in the right basically right where the bottom of the bullet is.
00:18:11.680 --> 00:18:23.519
And I can not expand the cases and try to seat bullets, and the base of the bullet will also start to make a ring right there because the brass becomes thicker, and then the cartridges won't seat into the chambers.
00:18:23.759 --> 00:18:33.279
If you were shooting lighter bullets like sub 400 grain, I don't think it would be an issue, but with the 440 grain cast or 500 grain jacketed that I have, it is an issue.
00:18:33.759 --> 00:18:39.359
So one thing I've got on the way is a set of five 500 Smith Wesson dies just aren't working great.
00:18:39.440 --> 00:18:42.160
There are no factory 500 JRH dies.
00:18:42.559 --> 00:18:47.680
So what I'm gonna try doing, I've got a set of RCBS 500 Action Express dies on the way.
00:18:47.759 --> 00:18:53.279
The 500 Action Express is just a couple thousand fatter than the 500 Smith Wesson.
00:18:53.440 --> 00:19:07.599
So I'm hoping that A sizing the cases in the 50AE dies will work better, not overwork the brass because fired cases I can drop a 500 grain bullet in, they go down and stop right at the crimp groove.
00:19:07.759 --> 00:19:13.119
Once I size the cases and seat those bullets, they'll bulge the case down there.
00:19:13.279 --> 00:19:16.799
So the cases are plenty fat, like the chambers are fat enough.
00:19:16.960 --> 00:19:20.880
It's an internal dimensions of the case using the 500 Smith and Weston dies.
00:19:21.119 --> 00:19:27.440
So for one, I'm gonna try using the 50 AE dies, they're just a couple thousandths fatter to size and seat bullets.
00:19:27.599 --> 00:19:32.640
And also, I'm hoping that the expander plug on the 500 AE dies is a little bit shorter.
00:19:32.880 --> 00:19:40.880
I could try to shorten the expander plug on my RCBS 500 Smith Wesson dies, but I don't really have a good way to do that right now.
00:19:41.119 --> 00:19:46.000
So reading on the forms, this is kind of an issue that guys do struggle with with this.
00:19:46.160 --> 00:19:53.200
Another thing that some of the guys are doing is they're taking a reamer and basically cutting some out of the inside of the cases.
00:19:53.279 --> 00:20:02.240
I do have a couple of uh reamers on the way that are just like general hand reamers, and I'm gonna try using probably my drill press to do that.
00:20:02.480 --> 00:20:13.680
And or another thing I'd like to try to do is take it down to the machine shop and see if they can basically make me a pilot for my trimmer that reams the inside of the case as I'm trimming them back.
00:20:13.920 --> 00:20:19.039
So I do have a little bit of work to do on the cases and the reloading side of it.
00:20:19.119 --> 00:20:22.079
I haven't quite got my reloading method perfected yet.
00:20:22.319 --> 00:20:27.200
But that is, like I said, anytime you move into Wildcats, there's gonna be little things like that.
00:20:27.279 --> 00:20:28.319
You just have to work through it.
00:20:28.559 --> 00:20:30.319
It's part of the fun, honestly.
00:20:30.559 --> 00:20:37.200
The other option would be to just you know spend the$160 and order some of the JRH brass from Buffalo Bore.
00:20:37.680 --> 00:20:43.119
If I could backtrack, knowing what I know now, if I was gonna get into this project again, that's what I would do.
00:20:43.279 --> 00:20:47.519
Because, you know, again, I was thinking, oh, I already have the Starline 500 Smith and Wesson brass.
00:20:47.680 --> 00:20:52.960
Well, I had to buy a$70 case holder for my trimmer, I had to buy a new cutter, that was about$20.
00:20:53.279 --> 00:20:57.599
I had to buy pilots, and and then of course that you know this reamer.
00:20:57.680 --> 00:21:02.240
I mean, I'm into I'm into tooling to make these cases for like$120 now.
00:21:02.480 --> 00:21:12.240
Plus, you know, and I already have the brass, so I'm not really fact you know factoring the cost of that, but it's about 90 bucks a hundred for the Starline brass if I had to go out and buy that for the 500 Smith and Wesson.
00:21:12.400 --> 00:21:23.359
So if I could, if I was gonna backtrack, I'm already invested into doing it this way, but if I was gonna get into this again, I would just buy 100 or 200 pieces of the JRH brass from Starline.
00:21:23.680 --> 00:21:29.519
And I mean, if you get 12 reloadings out of that, you know, or so, that's that's that's awesome.
00:21:29.759 --> 00:21:37.200
Another issue I'm running into with the JRH is crimp jump, and I'm using a 500 Smith and Weston die to crimp these.
00:21:37.279 --> 00:21:40.960
Um, I do have a redding profile crimper right now.
00:21:41.039 --> 00:21:52.799
I'm just using my RCBS seating die to to crimp, and as much crimp as I can put on them, launching a 440 grain cast bullet at over 1400 foot per second.
00:21:52.880 --> 00:21:57.279
My average velocity with my with the keith bullet is 1415.
00:21:58.000 --> 00:21:59.680
It is just it is it is jump and crimp.
00:22:00.160 --> 00:22:03.279
Another issue I that is an issue is my bullet choice.
00:22:03.359 --> 00:22:11.039
Is I'm using that 440 grain keith bullet, and when I was buying this, when I was buying this gun, I was like, oh yeah, man, this I love Keith bullets, this is gonna be great.
00:22:11.200 --> 00:22:16.079
Well, crimped in the crimp groove on that keith bullet, it is too long for the cylinder on this gun.
00:22:16.160 --> 00:22:20.079
So I'm having to seat them deep and crimp over the front driving band.
00:22:20.319 --> 00:22:23.519
Not really ideal for a heavy recoiling gun like this.
00:22:23.599 --> 00:22:26.240
I just cannot get enough crimp on them doing it that way.
00:22:26.400 --> 00:22:29.519
I don't know if the Redding profile crimper will
be better.
00:22:29.680 --> 00:22:31.839
I am probably gonna buy another bullet mold.
00:22:32.079 --> 00:22:41.440
MP has a 400 grain around flat, and as much as I'd like a Keith Bullet, I just don't know that I can get a true Keith bullet in this platform.
00:22:41.839 --> 00:22:46.880
Accurate molds has a couple of Keith Bullets designs that I think have a little bit shorter noses.
00:22:46.960 --> 00:22:49.440
I need to go on their website and look at the measurements.
00:22:49.519 --> 00:22:53.680
I might go that route as well, but I probably am going to buy a different bullet mold for this gun.
00:22:53.759 --> 00:22:57.839
It's unfortunate that that bullet mold isn't gonna work because I do really love that bullet design.
00:22:57.920 --> 00:23:06.240
It's a basically an exact copy of the Elmer Keith 429-421, but just scaled up to 50 caliber.
00:23:06.480 --> 00:23:07.920
It's a really great looking bullet.
00:23:08.400 --> 00:23:10.240
It's actually kind of comical how much bigger.
00:23:10.319 --> 00:23:12.960
I posted a picture on Instagram and Facebook the other day.
00:23:13.119 --> 00:23:16.480
It is comical how much bigger they are than the 44 bullets.
00:23:16.640 --> 00:23:21.200
And unless I can figure out crimping over the front driving band, it's not going to work in this gun.
00:23:21.440 --> 00:23:38.960
Now, another issue I'm running into with cast bullets is because I have to, because I'm getting that ring halfway down the cartridge, the only way I can get the cartridges to chamber is to run them back through a sizing die after they're loaded, and that is swaging my bullets down to about 5,000ths under size.
00:23:39.119 --> 00:23:41.039
I am casting my bullets fairly soft.
00:23:41.119 --> 00:23:42.720
They're only about 12 Brunel.
00:23:42.799 --> 00:23:48.000
I'm not getting any letting, and the pressures on that, you know, I'm shooting 29 and a half grains of H110.
00:23:48.079 --> 00:23:55.680
The pressure is high enough that I think the bullets are obturating up to the 501 for the throats and then five, but I'm not getting any letting.
00:23:55.759 --> 00:24:06.240
Like the bore on this thing looks great, which is very odd for how undersized my bullets are after sizing them through the running through the sizer die inside the cases.
00:24:06.880 --> 00:24:17.519
So I think that they're soft enough that they are coming up to up to size when I fire and the pressures, which is one of the reasons I like softer cast bullets.
00:24:17.599 --> 00:24:25.920
And I know hard cast is all the rage and they they might penetrate a little bit better, but cast soft cast bullets, in my opinion, usually shoot better.
00:24:26.160 --> 00:24:29.920
So uh yeah, so we got a few a few little bugs to work out with the ammo.
00:24:30.160 --> 00:24:35.519
Once I get my my my my bugs worked out, I'm actually going I'm actually I've already started writing it.
00:24:35.680 --> 00:24:39.759
I'm going to write a very detailed article for loading.
00:24:40.079 --> 00:24:43.359
There's not really a whole lot of information on reloading for this cartridge.
00:24:43.440 --> 00:24:45.839
There's not that many articles out there on this cartridge.
00:24:46.160 --> 00:24:48.799
If you hunt through the forms, you can find a little bit here and there.
00:24:48.880 --> 00:25:04.000
So I'm going to write a very detailed article about the gun, making cases the way I'm making cases for the best reliability and case life, bullet options, powder options, a little bit of load data and all that kind of stuff.
00:25:04.160 --> 00:25:07.519
And I'm actually going to try really hard to get this article published.
00:25:07.680 --> 00:25:14.079
I've sent a few articles out for publication here and there and never they never really went anywhere, but I'm going to try really hard.
00:25:14.160 --> 00:25:16.079
I'm not sure off the top of my head.
00:25:16.160 --> 00:25:19.440
I'm going to try to send it to hand loader and go from there.
00:25:20.079 --> 00:25:26.160
But I do plan on writing a very in-depth article on reloading and shooting the 500 JRH.
00:25:26.400 --> 00:25:29.440
As far as recoil goes, this is a high recoiling gun.
00:25:29.680 --> 00:25:32.640
Now, actually, let's let's backtrack there for a second.
00:25:32.799 --> 00:25:35.759
Let's talk about that 500 Smith and Wesson load thing.
00:25:36.000 --> 00:25:43.680
I, my X-rame, I didn't bring it out here, but the only 500 Smith Wesson pistol I have is a 4-inch X-rame.
00:25:43.839 --> 00:25:47.920
And Smith Wesson calls it a 4-inch, but it's really a 3-inch.
00:25:48.240 --> 00:25:51.279
You got a 3-inch barrel and then 1 inch of compensator.
00:25:51.680 --> 00:25:54.240
So you're really dealing with 3 inches a barrel.
00:25:54.559 --> 00:26:00.240
And buddy of mine has a 5-inch Smith Wesson, 500 Smith Wesson.
00:26:00.559 --> 00:26:02.480
And his is non-ported.
00:26:03.200 --> 00:26:04.319
Well, the true 5-inch.
00:26:04.640 --> 00:26:06.480
It's a very limited edition John Ross.
00:26:06.720 --> 00:26:10.559
We actually went out and shot it in a video the other day at the public range.
00:26:10.720 --> 00:26:11.680
It's not going to be a very good video.
00:26:11.759 --> 00:26:14.319
When I get a chance to edit that, it'll go up here on YouTube.
00:26:14.640 --> 00:26:20.640
But we went out and shot my 4-inch, his 5-inch, and this JRH side by side the other day.
00:26:20.720 --> 00:26:25.759
And we shot a couple of different factory 500 Smith Wesson loads, and I think a couple of hand loads.
00:26:26.000 --> 00:26:32.720
And the ammo we were shooting was HSM factory 440 grain bear load, as they call it.
00:26:33.039 --> 00:26:37.039
And I think we were getting about 1350 foot per second from his 5-inch.
00:26:37.119 --> 00:26:40.960
We were only getting like 1200 foot per second from my 3-inch.
00:26:41.119 --> 00:26:47.359
And then my 440 grain hand loads for the JRH were were doing just over 1400.
00:26:47.519 --> 00:26:50.160
So it was smoking the 500 Smith Wesson.
00:26:50.240 --> 00:26:54.000
But now something to think about is how short the barrel is on that 4-inch X-frame.
00:26:54.079 --> 00:26:59.200
I said I made this comment online the other day, and people were pissed.
00:26:59.279 --> 00:27:01.680
Like they were, they were they were telling me there was no way.
00:27:01.920 --> 00:27:07.759
I really don't know why Smith Wesson puts the compensator on those guns, other than just for show and tell.
00:27:07.920 --> 00:27:11.200
Because the fireball on that thing is just absolutely insane.
00:27:11.359 --> 00:27:20.319
So to do the same thing as the JRH, a 440 grain at 1350, 1400 foot per second, it uses about 15 grains more H110.
00:27:20.480 --> 00:27:22.960
Now, H110 is a slow burning powder.
00:27:23.039 --> 00:27:28.559
So on a three-inch barrel, most of that powder is burning outside of the barrel in a giant fireball.
00:27:28.720 --> 00:27:40.559
And most of the factory 500 Smith and Weston loads are I don't know if they're going to use H110 in a factory load, they're probably using some kind of canister powder that the rest of us can't have, but it's going to be similar to H-110, I would think.
00:27:40.960 --> 00:27:41.920
And it's just burning.
00:27:42.079 --> 00:27:55.599
I mean, you I've I've got I'm I've taken video of shooting this gun and the 500 Smith Weston in the dark, and this thing has almost no fireball, and the and the 3 inch, 4 inch, 500 Smith and Wesson is just you know eight foot of fireball.
00:27:56.559 --> 00:28:02.079
And it's because it's such a high volume H110, it's mostly burning outside of the barrel.
00:28:02.160 --> 00:28:06.160
We're using less powder to do the same thing in this gun.
00:28:06.400 --> 00:28:08.240
So it's just a more efficient cartridge.
00:28:08.319 --> 00:28:15.039
Now, if you push the 500 Smith and Wesson to the absolute max and put it in like maybe an eight-inch barrel, yeah, it's probably gonna smoke the JRH.
00:28:15.200 --> 00:28:21.039
But in a shorter barrel, because I'm using less powder to do the same thing, it's just doing a better job.
00:28:21.200 --> 00:28:23.599
Right now, and again again, I only tested one kind of load.
00:28:23.680 --> 00:28:28.480
I mean, it I'd have to do so much testing, it's not even funny to really come up with some some good.
00:28:28.880 --> 00:28:33.200
That was a that was a a one-time situation, one load.
00:28:33.519 --> 00:28:37.680
But man, people just people were mad when I said that that I was getting better performance.
00:28:37.759 --> 00:28:39.440
And again, I'm also shooting hand loads.
00:28:39.680 --> 00:28:46.000
29 and a half grain to H110 and the 500 JRH is a max load, and the factory isn't gonna load the max.
00:28:46.799 --> 00:28:52.559
The I because this is this is a wildcat cartridge, there's not really a pressure rating for it.
00:28:52.720 --> 00:29:02.160
Most of the load data I've seen for like the line ball and the little bit for the 500 JRH, yeah,
it runs about 36,000 psi.
00:29:02.480 --> 00:29:06.880
The fifth the 500 Smith Wesson is is a 60,000 PSI cartridge.
00:29:07.039 --> 00:29:08.640
Nobody loads it that hot.
00:29:08.880 --> 00:29:12.559
I think like the hottest factory loads run about 50,000 psi.
00:29:13.279 --> 00:29:15.440
The BFR will handle a lot of pressure.
00:29:15.519 --> 00:29:22.480
I'm not gonna I'm not gonna sit here and tell you you can max out and load 60,000 psi in the JRH.
00:29:23.279 --> 00:29:34.240
But I will say that Magnum Research makes the BFR long frame in 500 Smith and Wesson, and that has to be able to handle proofload 500 Smith and Wesson loads, which I believe are 90,000.
00:29:34.480 --> 00:29:44.720
This is a very strong gun, but I would I don't think you'd want to load it past about 35,000-36,000 PSI like modes of line ball load because it just becomes so in brutal to shoot.
00:29:45.119 --> 00:29:49.680
Shooting a 440 grain at 1400 foot per second is not a fun load to shoot.
00:29:49.839 --> 00:29:56.720
I shot, oh man, I was doing some accuracy testing with this gun the other day, and I shot 42 rounds in one sitting.
00:29:56.799 --> 00:30:00.559
And I'll tell you what, the next day it felt like my hands were hammered on by a sledgehammer.
00:30:00.720 --> 00:30:02.640
And it is a difficult gun to shoot well.
00:30:02.720 --> 00:30:06.480
If you do your part, this gun at 25 yards will put them in the same hole.
00:30:06.640 --> 00:30:08.400
It is very difficult to do that.
00:30:08.559 --> 00:30:16.319
My best group at 25 yards was only about two and a half inches, and I was like, it'd be like three touching and then usually a couple high.
00:30:16.640 --> 00:30:21.519
Because it just it's so it's so easy when you're shooting off the bags and trying to anticipate recoil.
00:30:21.839 --> 00:30:26.480
No, you want the gun to surprise you when you go off to get your best accuracy.
00:30:26.720 --> 00:30:32.880
It's really easy with this gun to try to anticipate recoil and not and not shoot it very well.
00:30:33.119 --> 00:30:35.839
And again, I haven't really worked with any of the lighter loads.
00:30:35.920 --> 00:30:45.519
Ideally, a 440 grain or 400 or 440 grain bullet at you know 1050, 1100 is really all you probably need from this gun.
00:30:45.680 --> 00:30:53.119
I still it's a hard-hitting load just because of how massive the bullets are, and it would be a lot more pleasant to shoot.
00:30:53.279 --> 00:30:59.519
Uh, I haven't started working, I went when I when I bought the gun, I went straight to the max because I wanted to see what the cartridge was capable of.
00:30:59.680 --> 00:31:12.000
Um, it's a it's a phenomenal uh I'm absolutely loving this cartridge, but until I get my reloading technique down to where I'm can make really good ammo for it, I haven't really messed with a whole lot of load development.
00:31:12.079 --> 00:31:19.119
I I well went I went straight to the maximum 29.5 grain load I could find online and I and I left
it there.
00:31:19.200 --> 00:31:20.160
That's that's what I'm loading.
00:31:20.240 --> 00:31:29.279
That's that's that's the extent of my load development for this cartridge, is to find the max I could find that anybody else has loaded and made note of online and load that.
00:31:29.440 --> 00:31:34.400
Of course, with H110, it has to be loaded to the maximum in order for it to perform well.
00:31:34.559 --> 00:31:38.240
And I went with H110, I'll probably end up using 4227 in this.
00:31:38.480 --> 00:31:42.480
I didn't want to burn up a whole bunch of my 4227 because I don't have very much.
00:31:42.559 --> 00:31:44.240
I've only got like a pound or two of that.
00:31:44.480 --> 00:31:57.839
I've been working on over here on my right, I've been working on inventorying and organizing all my reloading components because I've been buying out of states and doing this and doing that, and I've got like eight shelves full of reloading components over here.
00:31:58.160 --> 00:32:18.240
It's kind of funny because a funny video I made a while back about my 22 ammo stash has kind of gone viral a second time, and everybody in that video was calling me a hoarder, and I'm like, I'm not a hoarder, I'm just prepared, and then I've been going through my reloading components from buying out of states and whatever else the last couple years and thinking maybe I've got a little bit of a problem.
00:32:18.400 --> 00:32:37.519
So, one of the reasons I decided to use H110 and the 500 JRH for initial load testing is because I have 42 pounds of it, and I don't like H110 that much, and apparently nobody else does either because every time I buy out an estate, there'll be five or six pounds of H110, and I've just I've got a ton of H110.
00:32:37.599 --> 00:32:40.400
I've got a couple eight pounders of it, and I got a whole bunch of singles.
00:32:40.799 --> 00:32:42.480
This is a great place to use it up.
00:32:42.640 --> 00:32:47.279
Where powders I like a lot more, like 4227, or I've only got a couple pounds of it.
00:32:47.440 --> 00:32:49.519
I don't even have any 2400 right now.
00:32:49.759 --> 00:32:53.519
That's why I decided to use H110 in this in this platform for now.
00:32:53.680 --> 00:33:01.119
Like I said, ideally, I probably will keep a like that that's a honestly that loaded up 29 and a half grain, it is a is a very consistent load.
00:33:01.359 --> 00:33:02.400
It shoots really well.
00:33:02.480 --> 00:33:04.960
Like it's it's a good load, it's just a lot.
00:33:05.279 --> 00:33:06.880
One more thing with the crimp jump.
00:33:06.960 --> 00:33:08.240
I did mention this in the video.
00:33:08.400 --> 00:33:15.119
When you first buy buy these BFRs or any of the guns that have a free spin paw in them, you'll get like for me, it took me a while to get used to that.
00:33:15.200 --> 00:33:22.079
Because you get so used to the to the hearing the clicks and kind of uh indexing the chambers off the clicks for for ejection and that kind of stuff.
00:33:22.319 --> 00:33:24.160
Um, it felt really weird.
00:33:24.480 --> 00:33:36.720
However, the free spin paw is really good because if you do have a cartridge jump crimp, and it won't go past the forcing cone and on a Ruger that'd be the gun would be locked up.
00:33:36.880 --> 00:33:43.039
You'd have to get a rod and drive the bullet back in past far enough to turn the chambers or take the cylinder out.
00:33:43.519 --> 00:33:53.200
With the uh free spinning paw, when I have had cartridges jump crimp, I've just spin the cylinder backward, drop the drop the cartridge out and put it in and reload a new one.
00:33:53.519 --> 00:33:55.440
So I've come to really like that feature.
00:33:55.680 --> 00:33:57.759
I absolutely am in love with this gun.
00:33:57.839 --> 00:34:00.640
I've probably put about 200 rounds through it now total.
00:34:00.880 --> 00:34:03.119
And uh it's just it's a phenomenal gun.
00:34:03.200 --> 00:34:05.680
I'm I'm really loving the 500 JRH cartridge.
00:34:05.759 --> 00:34:07.599
I'm really loving this BFR.
00:34:07.920 --> 00:34:12.639
We'll definitely be doing a lot more content on this gun and the cartridge.
00:34:12.800 --> 00:34:18.880
And like I said, when I have a little extra money, my wife and I are trying to save money right now to buy a house, but I'm just tired of it.
00:34:19.119 --> 00:34:20.000
That's a long story.
00:34:20.079 --> 00:34:26.880
If I don't I probably shouldn't be talking about that, but like here the shop is is uh is 97 miles from our house.
00:34:27.119 --> 00:34:31.760
So a lot of times when I'm out here working, I end up sleeping in in the truck here in the shop or out on the road.
00:34:31.920 --> 00:34:36.639
I only go home, like I only get to go home like once a week when we're busy with work, that kind of stuff.
00:34:36.719 --> 00:34:38.000
That's why I'm taking this weekend off.
00:34:38.079 --> 00:34:45.039
It's the first time I've actually gotten to spend more than one night in my own bed in probably four months, five months.
00:34:45.199 --> 00:34:53.679
So we're we're in the process of trying to save up enough money for a down payment on a new house that'll be here in town or close to town.
00:34:53.920 --> 00:34:57.440
So I don't have uh, you know, so I go home every other night or every night.
00:34:57.760 --> 00:35:02.639
Unfortunately, we haven't found any property or houses yet that will allow me to have a private range.
00:35:02.800 --> 00:35:04.559
So uh I'm struggling with that in a little bit.
00:35:04.639 --> 00:35:10.239
I've come I've I've really begun become uh I've really come to like having my own range.
00:35:10.320 --> 00:35:20.000
I grew up with my dad had his own private range, but I grew up around a private range, and man, even like when even when we lived in town in Montana, I could always just hop on the full wheeler.
00:35:20.079 --> 00:35:26.000
Like we had a shooting range, like I'm half a mile out of town, like I could just hop on the full wheeler,
take a gun down there, and test fire stuff.
00:35:26.320 --> 00:35:33.119
So unless something miraculous happens, I'm probably gonna lose my private range, and I'm really struggling with it, but it'll be for the better.
00:35:33.440 --> 00:35:38.880
I have this pipe dream that someday this this gun content thing will take off and I can just do this full time.
00:35:38.960 --> 00:35:40.400
Like that's my dream, right?
00:35:40.639 --> 00:35:43.119
Realistically, it's probably never gonna happen.
00:35:43.199 --> 00:35:48.880
I I like the idea of it, but I also I know that I'm not the most entertaining guy to watch.
00:35:49.039 --> 00:35:53.519
I know that I'm not the smartest guy to to to talk about this kind of stuff and that kind of stuff.
00:35:53.599 --> 00:35:59.440
So I don't really ever expect, you know, I've been doing this for 10 years and and it hasn't really grown that much.
00:35:59.679 --> 00:36:01.760
Realistically, I know that'll probably never happen.
00:36:01.840 --> 00:36:12.960
But if it ever does, if it ever does, if that was to ever happen, I'd probably move back down to Lower 48, Idaho, or maybe Texas, and buy 20, 40 acres where I could have a big, you know, big range and just do this full time.
00:36:13.039 --> 00:36:14.719
That that'd be that'd be my dream, you know.
00:36:14.880 --> 00:36:17.039
But it'll it'll probably never happen.
00:36:17.280 --> 00:36:19.760
But a guy can I a guy has to dream, right?
00:36:20.079 --> 00:36:23.199
So anyway, guys, we're gonna go ahead and get this episode wrapped up.
00:36:23.360 --> 00:36:28.079
Um, let me know what your guys think of this 500 JHR the the and the BFR.
00:36:28.159 --> 00:36:32.719
Uh anything you'd like to maybe see for future content and and subject matter with it.
00:36:32.880 --> 00:36:40.559
I'm gonna go ahead and get this episode wrapped up because as soon as I leave here, I'm actually getting in my pickup to drive 97 miles back down to the house to go spend the weekend at home.
00:36:40.880 --> 00:36:44.400
And hopefully I can get time to edit a couple of the videos in the backlog.
00:36:44.639 --> 00:36:49.360
And of course, I'm hoping to get a chance to shoot this dandy little Colt police positive.
00:36:49.440 --> 00:36:51.199
This is just a really cool little gun.
00:36:51.360 --> 00:36:53.920
With all that being said, guys, we're gonna get this one wrapped up.
00:36:54.079 --> 00:36:57.679
Thank you for listening and watching the shooter's apprentice podcast.
00:36:57.760 --> 00:37:03.440
I really do appreciate everybody that just wants to listen to a little old me talk, um, or guess big old me talk.
00:37:03.519 --> 00:37:11.840
I'm you know, I'm not really a small guy, but it does it does uh mean a lot to me that you guys take time out of your week to uh to listen and watch and all that kind of stuff.
00:37:12.079 --> 00:37:24.159
You know, I still I've been trying to keep this, you know, when I talk about being able to grow, one of the things I I do kind of not like the idea of growth, I guess, because I really try to keep this like like among friends, you know.
00:37:24.239 --> 00:37:28.400
I want everybody to feel like we're sitting around the campfire talking and and doing that kind of stuff.
00:37:28.559 --> 00:37:33.119
And you know, I try to answer every comment I possibly can on YouTube and Facebook and everything like that.
00:37:33.280 --> 00:37:39.199
Uh the Facebook has grown, man, it's got like 25,000 followers, and we're getting 200, 300 comments on most of my posts.
00:37:39.280 --> 00:37:44.880
Now it's hard to keep up with all the comments, but here on YouTube I still can, on the podcast, I still can.
00:37:45.119 --> 00:37:48.960
And I really do like being able to interact with you guys on that level.
00:37:49.199 --> 00:37:51.119
So, but anyway, I'm starting to ramble.
00:37:51.199 --> 00:37:52.239
I'm gonna go ahead and get out of here.
00:37:52.320 --> 00:37:53.280
You guys have a great week.
00:37:53.440 --> 00:37:54.960
Hopefully, we will see you again next week.
00:37:55.119 --> 00:37:59.440
Until next time, stay safe out there and do not shoot yourself in the foot.