TRASCRIZIONE 🔗
WEBVTT
00:00:21.760 --> 00:00:25.120
Hello everyone and welcome to Making Vinyl at Master Disc.
00:00:25.199 --> 00:00:29.359
I'm Scott Hull, Chief Engineer and Owner of Master Disc in New York.
00:00:29.440 --> 00:00:32.719
And today, once again, I'm joined with KJ from the Odyssey.
00:00:33.119 --> 00:00:33.840
Hello, hello.
00:00:34.079 --> 00:00:34.719
Hey man.
00:00:34.880 --> 00:00:35.679
Welcome again.
00:00:36.000 --> 00:00:36.880
Thank you.
00:00:37.359 --> 00:00:42.560
Yeah, so I figured I'd uh bring up something that interests me today.
00:00:42.640 --> 00:00:55.200
Um we've touched on it before, um, but I'm curious about um the bits and pieces of the crazy grooves and things that um that you put into records.
00:00:55.359 --> 00:01:02.320
Um one in particular I was reading about the other day is a racetrack groove, and I have absolutely no idea what that is, but I love the name.
00:01:03.119 --> 00:01:03.679
Well, cool.
00:01:03.840 --> 00:01:07.200
So we'll get into the oddities of uh of disc cutting.
00:01:07.359 --> 00:01:11.359
We'll go out to the uh the outer reaches and the oddities, yes.
00:01:11.760 --> 00:01:12.560
Sweet.
00:01:12.959 --> 00:01:19.840
Well, a boring old record is just one groove from the outside of the record to the inside of the record.
00:01:20.000 --> 00:01:25.120
Um they're packed together pretty tightly, but it's just one it's one continuous groove.
00:01:25.359 --> 00:01:25.519
Okay.
00:01:25.920 --> 00:01:28.480
There's two parts of that that you need to know about.
00:01:28.719 --> 00:01:38.000
On the outside of the record, at the largest diameter, there's a thing called a safety groove, and it's a essentially a concentric groove.
00:01:38.079 --> 00:01:56.400
In other words, it the the turntable goes all the way around and it cuts a complete groove, and then the recording um uh the actual groove that you want to hear then comes off of that and and that's what moves into the inside, the spiral, into the to the part where the music is.
00:01:56.640 --> 00:01:56.879
Okay.
00:01:57.120 --> 00:02:01.519
The safety groove on the outside is called that because it's it's a landing pad.
00:02:01.840 --> 00:02:19.039
Uh it's usually a deeper groove, and it's a spot where the stylus is supposed to end up if you're if you're using a changer or if you're a little jittery, you know, uncertain with where you're going to put down the needle, um, it'll kind of pop into that safety groove and then it'll play fine.
00:02:19.280 --> 00:02:21.199
It's been that way since the LP.
00:02:21.439 --> 00:02:23.759
There's uh uh an outside concentric groove.
00:02:23.919 --> 00:02:32.879
And then at the very inside of the record, right next to the label, is a is the inside concentric groove, usually called the locked groove at the at the inside.
00:02:33.680 --> 00:02:44.719
What someone long ago figured out was that if you um if you spaced the grooves out appropriately, you could actually fit more than one groove onto a record.
00:02:45.599 --> 00:02:52.639
It's hard enough to sort of visualize this when you're actually looking at it, but to describe it um without pictures is is uh is a bit of a challenge.
00:02:53.280 --> 00:02:54.719
But imagine this.
00:02:54.960 --> 00:03:01.919
Um you've got a a s a circle, all right, that's your outer groove, that's your safety groove.
00:03:02.560 --> 00:03:07.599
And at um at three o'clock, uh, you know, let's think, imagine that as a clock face.
00:03:08.000 --> 00:03:19.599
All right, and at three o'clock on that is when this groove spirals out of that and towards the center of the record, and that's your first groove that you that you cut.
00:03:20.080 --> 00:03:25.919
And if you leave a sufficient amount of space between the grooves, none of this stuff happens automatically.
00:03:26.000 --> 00:03:27.439
It all has to be done manually.
00:03:27.840 --> 00:03:29.919
And it sounds incredibly difficult already.
00:03:30.159 --> 00:03:44.719
Uh so now imagine this circle with groove number one coming off at the three o'clock portion on the on the clock, and now I want to have a second groove that peels off at the nine o'clock portion of that clock face.
00:03:45.360 --> 00:04:02.639
So now it depends which groove you're going to actually play when you s when you put the record on, depends on whether you drop the needle somewhere around the the 12 o'clock hour at the top of the record or somewhere around the six o'clock hour at the bottom of the record.
00:04:02.879 --> 00:04:09.120
The record is turning, and it's almost impossible to deliberately put it into one groove or into another groove.
00:04:09.280 --> 00:04:11.919
It's more or less going to be by chance.
00:04:12.719 --> 00:04:24.959
So the um, you know, the fun things that you can do with this is you can actually um make the consumer think that there's only one program on there, except some days they pick up the record and they hear a completely different program.
00:04:25.439 --> 00:04:32.720
And uh or you can put um which what I did for um an artist's one of the sides is normal.
00:04:32.800 --> 00:04:44.399
The other side has a a two-groove side, and one of the songs on that side had two versions of it, one sung by the male lead and one sung by the female lead.
00:04:44.639 --> 00:04:45.360
Oh, amazing.
00:04:45.680 --> 00:04:54.399
So you start this side listening to three songs, um, and not knowing which one you're gonna hear when you get to the fourth cut.
00:04:54.720 --> 00:04:56.399
So it's kind of fun.
00:04:56.720 --> 00:05:01.759
The you know, it you really don't know, you you really have no idea which one's gonna play when you get there.
00:05:01.920 --> 00:05:04.240
But it's a completely a sort of a game of chance.
00:05:04.399 --> 00:05:10.480
You could hit the one groove, you know, the three times in a row and then hit the other one five times in a row, or they could alternate.
00:05:10.560 --> 00:05:21.279
It it really um without you stopping
Load full transcript
the turntable and deliberately placing the tonearm in a specific place on the turntable, um, you you can't predict which groove is gonna play.
00:05:21.920 --> 00:05:29.839
The process of doing that is uh, you know, it's it's one of those things that for many people think is, you know, just too hard to try.
00:05:30.079 --> 00:05:32.160
It's it's almost impossible.
00:05:32.560 --> 00:05:41.680
But with some I I figured out some ways of making it work on my lathe, and I created a process so that I could repeat it.
00:05:42.399 --> 00:05:50.480
And by using that process, I was able to reliably get two and potentially even three grooves to run on a side.
00:05:50.560 --> 00:05:56.720
I supp and I at the time was thinking, you know what, if somebody really wanted to do it badly enough, I could probably do four.
00:05:58.000 --> 00:06:06.000
There's a really cool old, old, old record that was made, um must have been made in the 78 um uh time frame.
00:06:06.240 --> 00:06:11.439
But it was um four groove record that was a horse race.
00:06:11.680 --> 00:06:15.360
It was basically what they refer to as the stretch call on a horse race.
00:06:15.439 --> 00:06:38.480
So that's the last, you know, the last uh f three or four minutes of a horse race as the horses are coming around the final turn, and the play-by-play call from the announcer uh gets more excited as um horse number one is coming up on the inside, and the second horse is, you know, is uh you know is blocking, but then uh the third horse is coming from the fourth horse is coming from the back.
00:06:38.639 --> 00:06:40.240
So that's what the stretch call is.
00:06:40.399 --> 00:06:55.279
Well, they made a record uh with the same four horses in four different recordings of four different stretch calls that were the same up until like the last twenty seconds, and uh each one of the different grooves had a different horse win the race.
00:06:55.600 --> 00:06:57.120
That's absolutely insane.
00:06:57.199 --> 00:07:04.879
And uh what an incredible um what an incredible idea of sort of like early, I don't know, artificial intelligence in gaming.
00:07:06.480 --> 00:07:16.800
Servicemen apparently needed something to keep them uh uh keep them occupied, um, you know, but between um moments of uh of you know trying to stay alive and you know.
00:07:17.120 --> 00:07:34.879
Um so this was used in the uh in the PX, the the recreation area for the servicemen, and they would literally bet on and you know they'd throw their money down, and the operator would you know drop the needle and one of the four horses would win the race, and it was a game of chance.
00:07:35.199 --> 00:07:36.000
That's crazy.
00:07:36.240 --> 00:07:40.800
When did you personally become aware of this craziness in vinyl?
00:07:41.759 --> 00:07:49.680
Well, there was I uh unbeknownst to me, um, I fell prey to this many years ago when I was a kid.
00:07:49.920 --> 00:08:06.480
I actually uh really enjoyed Monty Python, and most of the people that I hung around with um quoted Monty Python, everything from um, you know, the argument and the Polly Parrot, the Parrot sketch, and um um, you know, it goes on and on and on.
00:08:06.560 --> 00:08:10.000
If you're a fan of Monty Python, you're a fan of all Monty Python.
00:08:10.240 --> 00:08:23.439
So a friend of mine had bought a record, and um he he lent it to me, and I made a cassette copy of it, because that's what we did back then, um, and I listened to it and enjoyed the record and gave it back to him.
00:08:23.680 --> 00:08:26.959
And um um it was a normal record.
00:08:27.680 --> 00:08:28.959
A side and a B side.
00:08:29.120 --> 00:08:35.519
I was kind of surprised it fit, you know, really easily on my you know, 45-minute cassette.
00:08:35.600 --> 00:08:38.720
So I but I hadn't really noticed why, realized why.
00:08:39.039 --> 00:08:45.759
So we're all around sitting around talking about the record, and they start quoting from a bit.
00:08:45.840 --> 00:08:47.840
And I said, Where did you hear that?
00:08:48.000 --> 00:08:49.440
I said, that's that's totally new.
00:08:49.519 --> 00:08:50.879
I hadn't hadn't heard it at all.
00:08:51.039 --> 00:09:00.960
Well it turns out that the B side of that record, or one side of that record, had um uh two different grooves, just like I was describing.
00:09:01.200 --> 00:09:07.840
And um it was really the Money Python three-sided record, but it was on just two sides of vinyl.
00:09:08.399 --> 00:09:13.919
So the uh depend him it was chance which program you were going to hear on the B side.
00:09:14.000 --> 00:09:18.240
And as it turned out, I never had heard the bits on the B side.
00:09:18.320 --> 00:09:27.360
I had really felt like I missed out, but if I had owned the record and I would have uh eventually discovered the um you know the the sort of the hidden track.
00:09:27.840 --> 00:09:29.600
There's no magic here though.
00:09:29.759 --> 00:09:35.039
It actually takes up more space on the disc to run two grooves than it does to just run run one.
00:09:35.200 --> 00:09:38.080
So you don't get like twice as much playing time.
00:09:38.240 --> 00:09:42.000
You actually get half as much playing time for each groove if you're gonna put two on.
00:09:42.159 --> 00:09:49.279
And if you're gonna put four on a side, you're gonna get you know less than one-fourth the th the playing time available.
00:09:49.600 --> 00:09:58.559
Because it's still using up the same amount of space, it's just that the grooves are going down, you know, one after another in between the space is left from the other groove.
00:09:59.519 --> 00:10:04.799
So creating these things in your lathe room, I mean, is this is this like learning an instrument?
00:10:04.960 --> 00:10:12.639
Is this something you practice and you you know you blow aside and you try again and a little trial and error and a little creativity and a little skill?
00:10:13.279 --> 00:10:17.200
Well, yeah, it started with uh figuring out how the
heck I was going to be able to do it.
00:10:17.279 --> 00:10:20.559
Um well it started with somebody asking me the question, can it be done?
00:10:20.879 --> 00:10:30.399
And um I knew it could be done on older style equipment that had could it was it were easy to uh start set up and and cut fixed pitch.
00:10:30.639 --> 00:10:37.200
Fixed pitch means there's a um the spacing between every groove is exactly the same throughout the course of the record.
00:10:37.360 --> 00:10:37.919
It's fixed.
00:10:38.159 --> 00:10:38.399
Okay.
00:10:38.639 --> 00:10:41.679
Um that's how 78s were cut, that's why they look the way they do.
00:10:41.759 --> 00:10:49.519
They you can't actually see the modulation of the the audio in the grooves, but on an LP and 45s you usually can.
00:10:50.159 --> 00:10:58.159
But if I went back to an old school techno technique called fixed pitch cutting, um then I could set a really wide space between the grooves.
00:10:58.240 --> 00:11:14.080
And then when I drop, we call it dropping the head, when I lower the head into the record to cut the second groove, looking through the microscope, I can see that it's either too close or that's either you know right in the center of the two grooves that have already been cut.
00:11:14.240 --> 00:11:20.720
The one I'm I I literally driving the groove down the center of the land between the two grooves.
00:11:20.960 --> 00:11:22.080
It's very hard to explain.
00:11:22.159 --> 00:11:24.399
But hopefully I've given you enough of a picture that you can.
00:11:24.960 --> 00:11:27.279
No, I actually do have a picture of it in my head.
00:11:27.440 --> 00:11:30.960
Um I'm so this this lathe that you have, it's a Norman, right?
00:11:31.039 --> 00:11:35.360
Is is there is there a button that you push to make it fixed pitch?
00:11:36.000 --> 00:11:56.080
Uh well, yeah, there's ways of disabling the pitch um generation system, but um uh it it it required some modifications, but there was a different way of of accomplishing it by by tricking the preview computer, making it space, uh uh uh defining its its um um the the way of tricking the computer.
00:11:56.480 --> 00:11:56.960
Gotcha.
00:11:57.279 --> 00:11:58.960
I barely understand it, but it works.
00:11:59.440 --> 00:12:02.080
No, uh it's it's it's another one of those dark arts.
00:12:02.159 --> 00:12:03.759
I mean it's it's the craziest thing.
00:12:04.000 --> 00:12:08.639
So how how often does it come up between you and a MasterDisc client?
00:12:09.200 --> 00:12:10.720
It's only been a couple times.
00:12:10.799 --> 00:12:14.080
Um I've I've done three of them uh successfully.
00:12:14.320 --> 00:12:22.000
Um only one that I'm certain went to production because I actually have got um you know pressed copies of of that one.
00:12:22.159 --> 00:12:28.480
Um another one was considered as a as a 10-inch single with uh three songs on it and two songs on one side.
00:12:28.720 --> 00:12:31.919
Um been trying to get trying to interest more people
in doing it.
00:12:32.080 --> 00:12:36.159
It's pretty darn time consuming and it's pretty gets pretty expensive.
00:12:36.320 --> 00:12:39.759
So it it's it's not for the um Faint of heart.
00:12:39.919 --> 00:12:41.759
Yeah, faint of wallet, unfortunately.
00:12:42.320 --> 00:12:46.240
It's uh you know, I don't I don't bragging about charging people a lot of money.
00:12:46.320 --> 00:12:48.159
It just takes so much extra time.
00:12:48.320 --> 00:12:50.480
It's like cutting the record four times.
00:12:50.799 --> 00:12:54.480
Yeah, well, I mean, you know, you want it you want something special, you have to pay special prices.
00:12:54.559 --> 00:12:55.759
I mean, it it makes sense.
00:12:56.159 --> 00:12:59.279
It really isn't it really isn't for too many people doing it.
00:12:59.360 --> 00:13:03.519
Um doing it in a way so that it actually turns out and sounds good.
00:13:30.240 --> 00:13:34.080
So uh what about when it gets to the uh pressing plant?
00:13:34.240 --> 00:13:38.799
Are there implications of the of the you know multi-groove racetrack groove thing?
00:13:38.879 --> 00:13:41.039
Is there do you have to warn them ahead of time?
00:13:41.679 --> 00:13:47.840
Actually, the good news is plating and pressing is just a uh a copying step, a replication step.
00:13:48.159 --> 00:13:54.720
So um whatever condition the groove is in, when we send it to them, that's what they're gonna replicate.
00:13:54.799 --> 00:14:04.080
Um to that point, uh sometimes on a four-sided record, or but let me say it differently, on a three-sided record where we're actually going to use two discs.
00:14:04.159 --> 00:14:09.360
So it's gonna be an A-side, a B side, and a C side, where the D side's going to be a blank record.
00:14:09.519 --> 00:14:16.000
Um sometimes they just put a blank groove on there, but other times you actually can carve an etching into the vinyl.
00:14:16.720 --> 00:14:30.799
In this case, you you uh you have a graphic artist to actually make physical art into the lacquer, and then when they um plate it and press it, that pattern gets embossed into the back of the second disc on the D side.
00:14:31.200 --> 00:14:36.879
Um it doesn't have sound, it's not playable, it's it's you know, it's a etching.
00:14:37.039 --> 00:14:40.799
It's a it's a graphic element, it's something unique.
00:14:41.200 --> 00:14:44.799
Yeah, they they actually can plate them and press them normally.
00:14:44.960 --> 00:14:54.480
Um it comes up we have to let them know in quality control because um if they listen to one groove top to bottom, they'll figure they have uh listened to the whole record.
00:14:54.639 --> 00:14:58.080
They have to be aware that there's a second groove that they have to listen to.
00:14:58.879 --> 00:15:06.720
And does it look any different to the uh you know when you when you pull it out of the jacket the first time, do you see anything or does it just seem like a regular record?
00:15:07.039 --> 00:15:13.360
It looks pretty much like
a regular record, um, especially if you're able to pack the grooves together pretty closely.
00:15:13.679 --> 00:15:16.080
You kind of have to to get a decent playing time.
00:15:16.320 --> 00:15:22.559
But um it's uh no, it should look it well, it's gonna look a little different because it's uh a fixed pitch.
00:15:22.639 --> 00:15:41.519
Um uh variable pitch records, you can kind of see if you if you take the record and look at a reflection of the light in the surface of the record, any light, the sun or an indoor light, and just look look at the record, but as a at a glancing angle, you'll see that there's a varying patterns of the grooves on the record.
00:15:41.759 --> 00:15:54.000
And if you know the the audio that's on the record, you'll soon learn that that pattern is analogous to the levels and the audio and the phase relationships with the audio that's on that disc.
00:15:54.559 --> 00:16:06.000
So you can actually see where the loud spots are, you can actually see where the floor tom is played in the, you know, um uh uh you know, in the beat or where the bass drum comes in in an orchestral piece.
00:16:06.159 --> 00:16:12.879
And then you can see where the soft sections are because the the grooves don't move very much and they're really closely packed together.
00:16:13.919 --> 00:16:16.320
Naked eye you can actually see a lot of that stuff.
00:16:16.480 --> 00:16:27.200
Um it's um so on a fixed pitch record or like on a multi-groove record, um you'll you might notice that there's very you you almost don't see any of that patterning.
00:16:27.440 --> 00:16:34.240
It actually looks something like a a little bit more like a 78 um does, but the grooves are um closer together.
00:16:35.039 --> 00:16:39.120
So this is different from a a locked groove record, right?
00:16:39.440 --> 00:16:40.720
This is a different technique.
00:16:40.960 --> 00:16:41.120
Yes.
00:16:41.279 --> 00:16:42.240
Yeah, completely different.
00:16:42.480 --> 00:16:42.720
Okay.
00:16:42.960 --> 00:16:45.200
So tell me tell me a little bit about locked groove.
00:16:45.519 --> 00:16:54.639
Well, the the locked groove, um, you know, we we talked about uh how there's a safety groove on the outside of the record and how there's a locked groove at the end of the record.
00:16:54.960 --> 00:17:00.960
You can program the disc so that there's locked grooves during the course of the record.
00:17:01.440 --> 00:17:16.240
So uh this is often used by um uh often created so that um performance DJ performance artists have uh beats that they can play and loop to live off of turntables.
00:17:16.640 --> 00:17:49.039
So you could have track one on the vinyl play a a beat or groove, you know, for 15 seconds or 30 seconds or so, and then cause the lathe to cut a locked groove, and then after it's done cutting its concentric groove, it cuts back over itself, the head lifts up, and now we have if you play that segment, it'll play the beat, and then we'll it'll stop at the locked groove and keep repeating the locked groove infinitely until you take the needle off the record.
00:17:49.279 --> 00:17:51.599
Uh this is a deliberate skip.
00:17:51.920 --> 00:17:58.319
It's it's like a like a defective record that where it skips and just keeps repeating the same thing over and over again.
00:17:58.480 --> 00:18:10.480
But this is done deliberately, and it's usually done in tempo, so when when the music hits the locked groove, there's a small disturbance, but it doesn't cause the people dancing to lose step.
00:18:10.720 --> 00:18:13.200
It's supposed to stay in time, stay in tempo.
00:18:13.680 --> 00:18:14.880
Right, you don't drop the groove.
00:18:15.039 --> 00:18:24.880
Yeah, and this is something that probably, you know, classic, you know, sort of um uh experienced DJs know about that maybe the new generation of DJ just n doesn't encounter anymore.
00:18:25.359 --> 00:18:32.000
Well, yeah, this there's there's certainly software that um uh lets you do this by sampling and and triggering and looping.
00:18:32.160 --> 00:18:36.960
Um so that to some extents is to some extents that's not as um necessary.
00:18:37.279 --> 00:18:57.839
But it is kind of cool to have a two-table turntable setup, and you can literally get two locked grooves playing the beads together, um, change one of them, change another, and you know, create your mix, you know, off of off of these locks, as well as uh scratch, you know, um to uh to add excitement to the whole thing.
00:18:58.160 --> 00:18:59.200
Right, absolutely.
00:18:59.359 --> 00:19:02.720
So uh racetrack groove, we talked about locked groove.
00:19:02.880 --> 00:19:05.599
Are there are there other species of grooves?
00:19:08.559 --> 00:19:19.759
Well there's there's some um there are some details about the groove width and depth that are a little bit of a misnomer, a little bit misunderstood.
00:19:20.079 --> 00:19:42.319
Technically, there are uh the there's a way to cut a fat groove or a deeper groove and on a 12-inch single, you have the opportunity to cut a deeper groove if you want to, because you have more disc space and you're not so worried about um ex how much space that the groove's gonna use up, so you can make it a little bit deeper.
00:19:42.720 --> 00:19:53.039
A really deep groove doesn't improve the the sound, but a really shallow groove does have the tendency to skip more often.
00:19:53.279 --> 00:20:02.640
So we have a minimum size that we're supposed to not go bel beneath below, so you know, so that the record plays properly on a lot of different equipment.
00:20:03.279 --> 00:20:10.000
But if um if you have extra space along the side of your record, you can create a an extra deep groove.
00:20:10.240 --> 00:20:20.079
And so what's kind of happened as a result of this is um people have decided that uh having a fat groove is kind of like having an amp that goes to eleven.
00:20:20.720 --> 00:20:24.240
Um it's gotta be better than one that only goes to ten.
00:20:24.880 -->
00:20:27.119
Um if you understand if you catch my drift.
00:20:27.519 --> 00:20:28.559
Spinal tab, yes.
00:20:28.799 --> 00:20:29.519
Caught it.
00:20:30.799 --> 00:20:39.039
But um in fact, it's it's not really better as long as the groove is not too shallow.
00:20:39.279 --> 00:20:50.000
And so uh, you know, we will make the grooves a little bit dip deeper and a little bit wider and a little bit further apart when we have that opportunity when when the record isn't um really, really long.
00:20:50.640 --> 00:20:54.319
But it's not our experience that that actually makes the record better.
00:20:54.640 --> 00:21:02.240
That said, there's a there's uh an area it gets a little bit more gray when we start talking about hundred 180 gram records.
00:21:02.319 --> 00:21:16.400
These are thicker records to begin with, and it's often been reported that um um using a uh uh uh cutting the record deeper um for a 180 gram record produces a better result.
00:21:16.640 --> 00:21:19.279
And I have to land right on the fence on that one.
00:21:19.519 --> 00:21:26.720
Um it really depends on the plant, it really depends on the program, depends on the stylus that you're cutting with and the lacquers that you're using.
00:21:26.880 --> 00:21:28.799
I'm afraid it's not quite that straightforward.
00:21:29.039 --> 00:21:36.319
180 gram can sound great for a variety of and important reasons, but not usually because the groove is deeper.
00:21:36.720 --> 00:21:39.599
But there's at least two different opinions on that.
00:21:39.680 --> 00:21:46.160
Um insisting that a 180 gram record um really should be cut with a with a deep groove.
00:21:46.240 --> 00:21:54.720
Aaron Ross Powell And if I if I spoke to somebody who really believed that um uh who who isn't on the fence about it, what reason would they give, do you suppose?
00:21:55.599 --> 00:22:10.559
Well, it's there's the theory that um you're you Using but you're using more material with a thicker groove so that you um a deeper groove um um translates the music um better back to the stylus.
00:22:10.960 --> 00:22:23.200
But the but the the reality is the stylus is such a tiny, tiny, tiny little contact patch um that um you know even on a very small groove it's it's going to move the the voice coil back and forth.
00:22:23.359 --> 00:22:31.359
It's it's really a function of in my opinion, it's it's it's it's just a function of uh preventing skipping and preventing warping.
00:22:31.599 --> 00:22:40.559
Um I don't want to I don't want to dissuade people from from enjoying their 180 gram records because quite often they are uh a lot better quality.
00:22:40.720 --> 00:22:43.440
I just don't think the reason is because the groove's deep.
00:22:44.160 --> 00:22:44.480
Okay.
00:22:44.880 --> 00:22:45.599
Fair enough.
00:22:45.759 --> 00:22:56.400
So uh in the end, there it's it's kind of um it's sort of a security issue to keep your stylus where you want it to be, not necessarily an issue of sound quality, but there is
a sweet spot, right?
00:22:56.480 --> 00:22:58.400
There's um not too shallow and not too deep.
00:22:58.640 --> 00:22:59.759
Yeah, there there really is.
00:22:59.920 --> 00:23:04.160
I mean, uh uh some lacquers that we get today um actually get noisier as they go deep.
00:23:04.240 --> 00:23:06.720
So as as we cut deeper into them.
00:23:06.880 --> 00:23:22.400
And um, so that's w one one of the balancing acts here that um um i like I said, it varies with stylizing, it varies with with the lacquer, but um by and large the groove's gonna get a little noisier as it gets as it goes really deep.
00:23:22.960 --> 00:23:32.480
Is is there an implication of wear and tear if you if you're doing um you know deeper uh deeper cuts in the lacquer and and um wider grooves, perhaps?
00:23:32.640 --> 00:23:36.799
Is there uh do you have to change styli more often?
00:23:37.440 --> 00:23:38.319
Just a little bit.
00:23:38.559 --> 00:23:39.200
Just a little bit.
00:23:39.359 --> 00:23:43.119
The um the uh the cutting surface does wear out.
00:23:43.200 --> 00:23:46.640
Um it gets um just the the sharpness.
00:23:47.680 --> 00:23:52.799
It's it's such a small tool that it's very, very, very dis difficult to re-sharpen.
00:23:53.200 --> 00:24:04.960
Um but i th if the just like a knife blade or cutting tool, uh you use it you know over and over and over again, the the very razor thin edge of it rounds off slightly.
00:24:05.519 --> 00:24:10.960
And um you would think it would make it uh c go through the record better as it's worn.
00:24:11.359 --> 00:24:16.240
Um well, in fact, a brand new stylus is a little bit noisy.
00:24:16.559 --> 00:24:26.559
A stylus that's been worn in for about 30 or 40 minutes um starts to sound uh perfect and then is good for quite a long period of time.
00:24:26.799 --> 00:24:34.559
And then once it once that edge of the gr of the cutting tool rounds off a little bit more, it starts to get noisy again.
00:24:35.039 --> 00:24:48.880
So there again, there's a sweet spot to you know to that aspect as well, and it's incredibly difficult to quantify, um, but it's but it exists, and you sort of, you know, somebody with uh your experience, you just you know it when you hit it.
00:24:49.519 --> 00:24:51.119
Well, we monitor everything.
00:24:51.200 --> 00:24:57.279
We we we can't play back the master lacquer, but we do test cuts on every cut, every time we cut a record.
00:24:57.440 --> 00:25:08.240
Um so the test cut is cutting the outer portion of the disc beyond where the record is going to be, in that um, you know, we've said before we cut the masters on 14 inch blanks.
00:25:08.319 --> 00:25:23.039
So outside of the 12-inch diameter, there's some free space where we can cut test cuts and we cut and listen to the playback um every single time because you you just never know when that's not when it's going to have cut its last side.
00:25:23.519 --> 00:25:42.160
Um uh and we measure this we listen carefully and uh you know try to understand what the noise uh parameters sound like, but we also measure it, and there's a pass fail point, uh which I I won't allow the the the part to go out the door if it's too noisy.
00:25:42.559 --> 00:25:43.119
Gotcha.
00:25:43.279 --> 00:25:45.599
So um who the hell knew?
00:25:45.839 --> 00:25:49.920
You know, the the uh my mind is blown by the the horse race thing, actually.
00:25:50.079 --> 00:26:01.759
Um we're gonna put up a a link on um MasterDisc's uh social media feeds, uh Facebook and Twitter and Instagram uh to some of the things that that Scott talked about today.
00:26:01.920 --> 00:26:14.319
The um the race uh that that racetrack that horse race thing, if if that's even available, but um certainly I'm sure you could find the Monty Python and and a couple contemporary artists, I would think.
00:26:14.559 --> 00:26:24.319
Um Yeah, I've I've seen a YouTube um Um video of that horse track, horse horse race, uh four-track uh record.
00:26:24.480 --> 00:26:33.519
Um I haven't actually physically held it in my hands, but it um I've I've seen it I've seen it and heard it, and considered uh making my own version of it someday.
00:26:33.599 --> 00:26:41.119
So if anybody's got any bright ideas and wants to uh uh and wants to have a really unique um record project, then uh hit me up with it.
00:26:41.279 --> 00:26:44.960
We'll we'll if if if it can be done, we'll figure out figure out how to do it.
00:26:45.279 --> 00:26:47.519
Hells yeah, give the man a challenge, seriously.
00:26:47.680 --> 00:27:11.119
So yeah, if you have questions, if you have thoughts, um if you uh want to hear about another type of groove um that the aliens handed down to us uh for vinyl enjoyment or something like that, hit up Scott and the MasterDisc team on uh you know Facebook and Twitter and Instagram, or just go to the website masterdisc.com and uh you know send an old-fashioned email.
00:27:11.599 --> 00:27:13.359
Um that's it then.
00:27:13.519 --> 00:27:13.920
All right, cool.
00:27:14.079 --> 00:27:14.640
Thank you, Scott.
00:27:14.880 --> 00:27:15.839
You're very welcome.
00:27:16.000 --> 00:27:21.279
And uh this is once again a podcast of Making Vinyl at MasterDisc.
00:27:21.359 --> 00:27:26.160
And uh thanks to KJ Fnatic for for uh bringing me all the questions.
00:27:26.480 --> 00:27:27.359
Alright, alright.
00:27:27.599 --> 00:27:28.799
See you guys later.